Read Sharp XG-P20XE Handy Guide online
Lamp Replacement Procedure
Version 1.4
Issue 04/2006
Issue 04/2006
12
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
4.
Remove the lamp unit cover.
•
Loosen the user service screw that secures the lamp unit cover.
Then open the cover in the direction of the arrow.
Then open the cover in the direction of the arrow.
5.
Remove the lamp unit.
•
Loosen the securing screws from the lamp unit. Hold the
lamp unit by the handle and pull it in the direction of the
arrow.
lamp unit by the handle and pull it in the direction of the
arrow.
6.
Insert the new lamp unit.
•
Press the lamp unit firmly into the lamp unit compartment. Fasten
the securing screws.
the securing screws.
7.
Attach the lamp unit cover.
•
Insert the tab of the lamp unit cover into the opening, and press the
cover until it clicks in place.
cover until it clicks in place.
Note
•
If the lamp unit and lamp cover are not correctly installed, the power
will not turn on, even if the power cord is connected to the projector.
will not turn on, even if the power cord is connected to the projector.
Click on the first or last page to see other XG-P20XE service manuals if exist.