Read Sharp XG-P20XE (serv.man19) User Guide / Operation Manual online
Operation Buttons
34
Using GyroRemote
Using the Presentation Tools
This projector is equipped with presentation tools that can be used to emphasise keypoints within your presentation.
You can adjust this setting by accessing the “Button Assign” list on your GyroRemote. Choose popup list “1/5” and
press Function Assign (1) to (4). (See page
press Function Assign (1) to (4). (See page
33
.)
Button Assign list
Stamp
Each time you press Function Assign (1), stamps can be
changed as shown below.
changed as shown below.
Line
Each time you press Function Assign (2), lines can be changed
as shown below (straight line, horizontal or vertical line, box,
circle, free line).
as shown below (straight line, horizontal or vertical line, box,
circle, free line).
Using stamps
1
Press Function Assign (1) repeatedly to select the
desired stamp.
desired stamp.
• Types of stamps are changed as shown left.
2
Press and hold down GYRO ACTIVE to move the stamp
to the desired position.
to the desired position.
3
Release GYRO ACTIVE to set the stamp in the desired
position.
position.
4
Press ENTER to bring up another stamp, then repeat steps
1 to 3 above.
1 to 3 above.
Using lines
1
Press Function Assign (2) repeatedly to select the
desired line.
desired line.
• Types of lines are changed as shown left.
2
Press and hold down GYRO ACTIVE to move the line to
the desired starting position.
the desired starting position.
3
Release GYRO ACTIVE and press ENTER to set the line
in its starting position.
in its starting position.
4
Press and hold down GYRO ACTIVE again and draw the
line by waving the unit around in the air freely.
line by waving the unit around in the air freely.
5
Release GYRO ACTIVE to set the ending point and
complete the line drawing.
complete the line drawing.
6
Press ENTER to bring up another line, then repeat steps
1 to 5 above.
1 to 5 above.
• In steps 2 and 4 above, while holding down GYRO ACTIVE, wave
the unit around in the air with your hand. The stamps and starting
positions of the lines move and the lines are drawn precisely in
concert with your hand movements.
positions of the lines move and the lines are drawn precisely in
concert with your hand movements.
• To change colours, press Function Assign (3) while performing
any of the steps above.
• To erase the item you just placed on the screen, press UNDO.
However, when you are drawing lines with the free line tool, pressing
UNDO will erase all free lines drawn.
UNDO will erase all free lines drawn.
Displaying the Break Timer
You can adjust this setting by accessing the “Button Assign” list on your GyroRemote. Choose popup list “2/5” and
press Function Assign (4). (See page
press Function Assign (4). (See page
33
.)
• As soon as Function Assign (4) is pressed, the timer starts to count down from 5 minutes.
• If you press Function Assign (4) again, the Break Timer is
cancelled.
• You can set the Break Timer from 1 to 60 minutes with ∂/ƒ on the
projector or
ⴑ/ⴐ on the GyroRemote. The timer starts to count
down as soon as ∂/ƒ or
ⴑ/ⴐ is pressed.
• The Break Timer is displayed against the background image
selected in “Selecting a Startup Image”. (See page
55
.)
Item Colour
Each time you press Function Assign (3), colours can be
changed as shown below.
changed as shown below.
Red
Green
Blue
Yellow
Black
White
Purple
Light blue
Clear SCRN
When you press Function Assign (4), all items shown on the
screen can be cleared.
screen can be cleared.
• The last item selected before switching off the power is saved as
the default setting.
• A check mark signifies “Stamp”, a straight line is for “Line” and red
is for “Item Colour”.
Click on the first or last page to see other XG-P20XE (serv.man19) service manuals if exist.