XG-P20XE (serv.man17). Section 1 Important information - Sharp Projector User Guide / Operation Manual. Page 6

See “Replacing the Lamp” on pages 

 and 

.

For minimal servicing and to maintain high image quality,
SHARP recommends that this projector be installed in
an area free from humidity, dust and cigarette smoke.
When the projector is subjected to these environments,
the lens must be cleaned more often. As long as the
projector is regularly cleaned, use in these environments
will not reduce the overall operation life of the unit.
Internal cleaning should only be performed by a Sharp
Authorised LCD Projector Dealer or Service Centre.

• The exhaust vent, the lamp cage cover and adjacent

areas may be extremely hot during projector
operation. To prevent injury, do not touch these areas
until they have sufficiently cooled.

• Allow at least 10 cm of space between the exhaust

vent and the nearest wall or obstruction.

• If the cooling fan becomes obstructed, a protection

device will automatically turn off the projector lamp.
This does not indicate a malfunction. Remove the
projector power cord from the wall outlet and wait at
least 10 minutes. Then turn on the power by plugging
the power cord back in. This will return the projector
to the normal operating condition.

Potential hazard of glass particles if lamp ruptures. In
case of lamp rupture, contact your nearest Authorised
LCD Projector Dealer or Service Centre for a
replacement.
See “Replacing the Lamp” on pages 

 and 

.

CAUTION

PRECAUCIÓN

PRÉCAUTION

BEFORE REMOVING THE SCREW, DISCONNECT
POWER CORD. HOT SURFACE INSIDE
ALLOW 1 HOUR TO COOL BEFORE REPLACING
THE LAMP.  REPLACE WITH SAME SHARP LAMP
UNIT TYPE BQC-XGP20X//1 ONLY.
UV RADIATION : CAN CAUSE EYE DAMAGE.
TURN OFF LAMP BEFORE SERVICING.
MEDIUM PRESSURE LAMP : RISK OF EXPLOSION.
POTENTIAL HAZARD OF GLASS PARTICLES IF
LAMP HAS RUPTURED. HANDLE WITH CARE.
SEE OPERATION MANUAL.