Read Sharp XG-P20XE (serv.man17) User Guide / Operation Manual online
Important
Information
1
IMPORTANT
For your assistance in reporting the loss or theft of your
Colour LCD Projector, please record the Serial Number
located on the bottom of the projector and retain this
information. Before recycling the packaging, please be
sure that you have checked the contents of the carton
thoroughly against the list of “Supplied Accessories”
on page
Colour LCD Projector, please record the Serial Number
located on the bottom of the projector and retain this
information. Before recycling the packaging, please be
sure that you have checked the contents of the carton
thoroughly against the list of “Supplied Accessories”
on page
12
.
Before using the LCD projector, please read this operation manual carefully.
Model No.: XG-P20XE
Serial No.:
ENGLISH
Introduction
WARNING:
Intense light source. Do not look into the beam or view it directly. Be especially careful
that children do not look directly into the beam.
that children do not look directly into the beam.
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to liquids.
To reduce the risk of fire or electric shock, do not expose this appliance to liquids.
CAUTION:
To reduce the risk of electric shock, do not remove cabinet. No user-serviceable parts
are inside. Refer servicing to qualified service personnel.
To reduce the risk of electric shock, do not remove cabinet. No user-serviceable parts
are inside. Refer servicing to qualified service personnel.
WARNING:
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
WARNING:
The cooling fan in this projector continues to run for about 90 seconds after the projector
is turned off. During normal operation, when turning the power off always use the
POWER OFF button on the projector or the POWER button on the GyroRemote. Ensure
the cooling fan has stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY
DISCONNECTING THE POWER CORD. FAILURE TO OBSERVE THIS WILL RESULT
IN PREMATURE LAMP FAILURE.
The cooling fan in this projector continues to run for about 90 seconds after the projector
is turned off. During normal operation, when turning the power off always use the
POWER OFF button on the projector or the POWER button on the GyroRemote. Ensure
the cooling fan has stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY
DISCONNECTING THE POWER CORD. FAILURE TO OBSERVE THIS WILL RESULT
IN PREMATURE LAMP FAILURE.
For GyroRemote unit (RRMCG1631CEZZ)
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This device operates in the frequency band of 49.82 to 49.9 MHz. with RF output power of
less than 30 MicroWatts EIRP (Effective Isotropic Radiated Power).
Caution
Any changes made to this device not expressly approved by the manufacturer could void
the users right to operate this device.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This device operates in the frequency band of 49.82 to 49.9 MHz. with RF output power of
less than 30 MicroWatts EIRP (Effective Isotropic Radiated Power).
Caution
Any changes made to this device not expressly approved by the manufacturer could void
the users right to operate this device.
Click on the first or last page to see other XG-P20XE (serv.man17) service manuals if exist.