PG-M20S (serv.man28). Setup and connections - Sharp Projector User Guide / Operation Manual. Page 8

Read Sharp PG-M20S (serv.man28) User Guide / Operation Manual online

-22
1
DVI cable
(sold separately)
Connecting the Projector to Other Devices (cont.)
Connecting to a
Computer Using a DVI
Cable (Sold Separately)
This projector comes installed with a DVI digi-
tal input terminal in which computer digital im-
age signals can be directly input.
1
Connect the projector to the
computer using the DVI cable.
2
To input audio signal, connect
the projector to the computer
using a ø3.5 mm stereo audio
cable (commercially available
or available as Sharp service
part QCNW-4870CEZZ).
Note
This DVI port is DVI version 1.0 compat-
ible. Therefore when the signal is input
from copy guard system compatible (DVI
version 2.0) equipment, no signal will be
received.
“Plug and Play” function (when connecting to a 15-pin terminal)
■ This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC
compatible computer will communicate their setting requirements, allowing for quick and easy setup.
■ Before using the “Plug and Play” function, be sure to turn on the projector first and the connected
computer last.
Note
The DDC “Plug and Play” function of this projector operates only when used in conjunction with a VESA
DDC compatible computer.
Optional
cable
DVI cable
Type: AN-C3DV
(9'10" (3.0 m))
To DVI Digital Output port
To Audio
Output port
2
ø3.5 mm stereo
audio cable
(commercially
available or available
as Sharp service part
QCNW-4870CEZZ)
Desktop computer
Page of 12
Display

Click on the first or last page to see other PG-M20S (serv.man28) service manuals if exist.