PG-C45X (serv.man28). Connections and setup - Sharp Projector User Guide / Operation Manual. Page 4

■ Connect the thumbscrew cable making sure that

it fits correctly into the terminal. Then, firmly se-
cure the connectors by tightening the screws on
both sides of the plug.

■ Do not remove the ferrite core attached to the RGB

cable.

• Secure the connectors by tightening

the thumbscrews.

Note

• See page 

Chart” for a list of computer signals com-
patible with the projector. Use with com-
puter signals other than those listed may
cause some of the functions not to work.

• When connecting the projector to a com-

puter in this way, select “RGB” for “Signal
Type” in the “Picture” menu. See page 

.

• A Macintosh adaptor may be required for

use with some Macintosh computers. Con-
tact your nearest Shar p Authorized
Projector Dealer or Service Center.

• Depending on the computer you are us-

ing, an image may not be projected un-
less the signal output setting of the com-
puter is switched to the external output.
Refer to the computer operation manual
for switching the computer signal output
settings.

Supplied
accessories

Computer audio
cable

RGB cable

2

Computer audio cable

To RGB output terminal

To audio output terminal

1

RGB cable

Notebook computer

PG-C45X#E_PDF#p15_19.p65

03.2.17, 11:33 AM

18