Read Sharp PG-C45X (serv.man28) User Guide / Operation Manual online
Connecting the Projector to Other Devices
Using as a Wired Remote Control
Connecting the Remote
Control to the Projector
Control to the Projector
When the remote control cannot be used due
to the range or positioning of the projector
(rear projection, etc.), connect a ø3.5 mm
minijack cable (commercially available or
available as Sharp service par t QCNW-
4870CEZZ) from the WIRED R/C JACK on the
top of the remote control to the WIRED RE-
MOTE control input terminal.
to the range or positioning of the projector
(rear projection, etc.), connect a ø3.5 mm
minijack cable (commercially available or
available as Sharp service par t QCNW-
4870CEZZ) from the WIRED R/C JACK on the
top of the remote control to the WIRED RE-
MOTE control input terminal.
ø3.5 mm minijack cable
(commercially available or available as
Sharp ser vice part QCNW-4870CEZZ)
(commercially available or available as
Sharp ser vice part QCNW-4870CEZZ)
To WIRED R/C JACK
WIRED REMOTE control input terminal
-26
PG-C45X#E_PDF#p20_26.p65
03.2.17, 11:33 AM
26
Click on the first or last page to see other PG-C45X (serv.man28) service manuals if exist.