PG-B10S (serv.man35). (part 4) Corrections, screen setup, appendix - Sharp Projector User Guide / Operation Manual. Page 9

Read Sharp PG-B10S (serv.man35) User Guide / Operation Manual online

-58
Translucent screen
Audience
When the image is projected from
behind the screen using the default
setting.
On-screen Display
Projecting a Reversed Image
Projection from behind the Screen
■ Place a translucent screen between the projector and the
audience.
■ Reverse the image by setting “Rear” in the “PRJ Mode” menu.
(See page 
49
.)
Projection Using a Mirror
■ Place a mirror (normal flat type) in front of the lens.
■ When the translucent screen is placed on between the mir-
ror and audience, set to “Front” in the “PRJ Mode” menu.
(See page 
49
.)
■ When the mirror is placed on the audience side, set to “Rear”
in the “PRJ Mode” menu. (See page 
49
.)
Info
When using a mirror, be sure to carefully position both the
projector and the mirror so the light does not shine into the
eyes of the audience.
Ceiling-mount Setup
■ It is recommended that you use the optional Sharp ceiling-
mount bracket for this installation.
Before mounting the projector, contact your nearest Sharp
Authorized Projector Dealer or Service Center to obtain the
recommended ceiling-mount bracket (sold separately).
AN-B10T ceiling-mount bracket, its AN-TK201 and
AN-TK202 extension tubes (for countries other than the
U.S.A.).
■ Be sure to adjust the position of the projector to match the
distance (H) from the lens center position (see page 
57
) to
the lower edge of the image, when mounting the projector on
the ceiling.
■ Do not mount the projector upside down.
The image is reversed.
Set to “Front”
Audience
Translucent screen
Mirror
Set to “Rear”
Audience
Mirror
Setting up the Screen
Set to “Rear”.
On-screen Display
Page of 29
Display

Click on the first or last page to see other PG-B10S (serv.man35) service manuals if exist.