Read Sharp PG-B10S (serv.man35) User Guide / Operation Manual online
-62
4
Remove the air filter.
•
Pick the air filter up with your fingers and
lift it out of the filter cover.
lift it out of the filter cover.
5
Clean the air filter.
•
Clean the dust off the air filter and cover
with a vacuum cleaner extension hose.
with a vacuum cleaner extension hose.
6
Replace the air filter.
•
Place the air filter underneath the tabs
on the filter cover.
on the filter cover.
7
Replace the filter cover.
•
Align the tab on the filter cover and place
it while pressing the tab to close it (1).
Then tighten the user service screw (2)
to secure the filter cover.
it while pressing the tab to close it (1).
Then tighten the user service screw (2)
to secure the filter cover.
1
2
Tab
User service screw
Replacing the Air Filter
Note
•
Be sure the filter cover is securely installed.
The power will not turn on unless it is
correctly installed.
The power will not turn on unless it is
correctly installed.
•
If dust or dirt has collected inside the rear
and bottom air filters (not removable), clean
the filter with a vacuum cleaner extension
hose.
and bottom air filters (not removable), clean
the filter with a vacuum cleaner extension
hose.
Click on the first or last page to see other PG-B10S (serv.man35) service manuals if exist.