Read Sharp PG-B10S (serv.man34) User Guide / Operation Manual online
-47
Using the
Menu
If you want to change the keycode, follow
the procedure below.
the procedure below.
Note
•
When “Anti-Theft” is selected, the password in-
put box will appear. After the password has been
entered, you can change the keycode.
put box will appear. After the password has been
entered, you can change the keycode.
1
Press the buttons on the remote
control or the projector to enter the
preset 4-digit keycode in “Old
Code”.
control or the projector to enter the
preset 4-digit keycode in “Old
Code”.
2
Press any button you like on the re-
mote control or the projector to en-
ter the new keycode.
mote control or the projector to en-
ter the new keycode.
3
Enter the same 4-digit keycode in
“Reconfirm”.
“Reconfirm”.
Note
•
If you do not want to set a keycode, leave the
keycode field blank in steps 2 and 3 and press
keycode field blank in steps 2 and 3 and press
.
If you want to clear the keycode input box,
follow the procedure below.
follow the procedure below.
▼Keycode input box
Note
•
When “Anti-Theft” is selected, the keycode in-
put box will appear.
put box will appear.
•
If no keycode is entered, the image will not be
displayed, even if the projector receives the in-
put signal.
displayed, even if the projector receives the in-
put signal.
1
Press
on the remote control or
on the projector to turn on the
projector.
2
Enter the keycode you set when the
keycode input box is displayed.
keycode input box is displayed.
Note
•
When entering the keycode, press the buttons
previously set on the projector or the remote
control.
previously set on the projector or the remote
control.
Click on the first or last page to see other PG-B10S (serv.man34) service manuals if exist.