Read Sharp PG-B10S (serv.man34) User Guide / Operation Manual online
-40
Signal Info
(Checking the
Input Signal)
Select “Signal Info” on the “Fine Sync” menu
to check the current input signal informa-
tion.
to check the current input signal informa-
tion.
Checking the menu screen
Page
34
Example: “Fine Sync” menu screen for
INPUT 1 mode
Note
•
The projector will display the number of
scanned lines available from audio-visual
equipment such as a DVD player or Digital
Video.
scanned lines available from audio-visual
equipment such as a DVD player or Digital
Video.
Auto Sync
(Auto Sync Adjust-
ment)
Used to automatically adjust a computer image.
Select “Auto Sync” on the “Fine Sync” menu
and set it to “
and set it to “
”(ON) or “
”(OFF).
Setting the menu screen
Page
34
Example: “Fine Sync” menu screen for
INPUT 1 mode
Description of Auto Sync Adjustment
Note
•
Auto Sync adjustment is also performed by
pressing
on the projector or
on the remote control.
•
The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
to complete, depending on the image of the
computer connected to the projector.
•
When the optimum image cannot be achieved
with Auto Sync adjustment, use manual adjust-
ments. (See page
with Auto Sync adjustment, use manual adjust-
ments. (See page
39
.)
Computer Image Adjustment
Selectable Settings
Description
Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Auto Sync adjustment is not automati-
cally performed.
cally performed.
ON
OFF
Click on the first or last page to see other PG-B10S (serv.man34) service manuals if exist.