Read Sharp PG-B10S (serv.man34) User Guide / Operation Manual online
-41
Using the
Menu
You can use the “Options” menu to enhance the usage for the projector.
Lamp Timer (Life)
(Check-
ing the Lamp Life Status)
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
and the remaining lamp life (percentage).
Display the “Options” menu to check the
lamp life status.
lamp life status.
Checking the menu screen
Page
34
Example: “Options” menu screen for
INPUT 2 (S-Video) mode
Description of Lamp Life
Note
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
For lamp replacement, contact your nearest
Sharp Authorized Projector Dealer or Service
Center.
For lamp replacement, contact your nearest
Sharp Authorized Projector Dealer or Service
Center.
• The table above indicates rough estimates in the
case of using only in each mode shown. Remain-
ing lamp life changes within the range of the val-
ues shown depending on the frequency at which
“Eco Mode” is switched to “
ing lamp life changes within the range of the val-
ues shown depending on the frequency at which
“Eco Mode” is switched to “
” (Eco mode) and
“
” (Standard mode) (see page
43
).
Using the “Options” Menu
Lamp usage condition
Operated exclusively
in Eco mode (
in Eco mode (
)
Operated exclusively
in Standard mode (
in Standard mode (
)
Remaining lamp life
100%
5%
Approx.
Approx.
4,000 hours
200 hours
Approx.
Approx.
2,000 hours
100 hours
OSD Display
(Setting On-
screen Display)
This function allows you to turn the on-screen
messages on or off.
messages on or off.
Select “
” (ON) or “
” (OFF) in “OSD
Display” on the “Options” menu.
Setting the menu screen
Page
34
Example: “Options” menu screen for
INPUT 2 (S-Video) mode
Description of “OSD Display” Settings
*
Displayed when the STANDBY button is pressed while
the keylock function is active.
the keylock function is active.
Description
All On-screen Displays are displayed.
INPUT/VOLUME/AV MUTE/FREEZE/
AUTO SYNC/ENLARGE/ “An invalid
button has been pressed.” / “All buttons on
Projector are locked.”
INPUT/VOLUME/AV MUTE/FREEZE/
AUTO SYNC/ENLARGE/ “An invalid
button has been pressed.” / “All buttons on
Projector are locked.”
*
are not displayed.
Selectable settings
(ON)
(OFF)
(OFF)
Click on the first or last page to see other PG-B10S (serv.man34) service manuals if exist.