Read Sharp PG-A20X (serv.man6) Service Manual online
normal function. Replace
the lamp when the indicator
temperature rises, this
indicator will illuminate red.
1, 2 or 3.
sound level or the
fan (Intake vent)
(on the bottom of
and attach it to the lens, then release the
buttons to lock it in place.
Press on the two buttons of the lens cap
and remove it from the lens.
screen display are simplified for explanation,
and may differ slightly from actual display.
(on the bottom of
terminal for INPUT
1, 2 and 3.
equipment with an
Kensington Security Stan-
dard connector for use with
a Kensington MicroSaver
Security System. Refer to
the information that came
with the system for instruc-
tions on how to use it to se-
cure the projector.
and [Page Up] keys on a computer
(NORMAL, BORDER, etc).
black screen and turning off the
adjusted on the menu.
SUM-3, HP-7 or similar)) are supplied in the
larities correctly match the
til it clicks into place.
Batteries of different types have different properties, therefore do not mix batteries of different types.
Do not mix new and old batteries.
This may shorten the life of new batteries or may cause old batteries to leak.
Remove the batteries from the remote control once they have run out, as leaving them in can cause them to leak.
Battery fluid from leaked batteries is harmful to skin, therefore be sure to first wipe them and then remove them
using a cloth.
sure to replace them as soon as possible with new batteries.
Remove the batteries from the remote control if you will not be using the remote control for a long time.
the projector within the ranges shown in
flected off a screen for easy operation. How-
ever, the effective distance of the signal may
differ depending on the screen material.
The remote control may malfunction under a
fluorescent lamp. In this case, move the pro-
jector away from the fluorescent lamp.