Read Sharp MX-SP10 Service Manual online
MX-RP13/SP10/CS10 UNPACKING AND INSTALLATION 2 - 1
：'11/Mar/14
1
[2] UNPACKING AND INSTALLATION
1. MX-RP13/SP10 Installation
The installing procedures below are described for the MX-SP10.
The installing procedures for the MX-RP13 are the same as below.
The installing procedures for the MX-RP13 are the same as below.
Turn the main switch to the “OFF” position and remove the
power plug from the outlet.
power plug from the outlet.
1)
Remove the document cover.
Remove the document cover from the copier.
2)
Remove the rear cabinet.
Remove the three screws and then remove the rear cabinet.
3)
Replace the right glass holder (For Europe only).
<1> Remove the two screws, and remove the right exterior
OC.
<2> Attach the right glass holder, and fix it with the two
screws which was removed in the above procedure.
1
•
Parts included
Right glass holder: 1 pc.
(For Europe only)
(For Europe only)
Screw (M3 x 8): 1 pc.
Screw (M3 x 6): 1 pc.
MX-SP10 Unit (SPF Unit)
MX-RP13 Unit (RSPF Unit)
1
1
"OFF"
Click on the first or last page to see other MX-SP10 service manuals if exist.