MX-PNX6. Service Manual Revised May 2014. - Sharp Copying Equipment Service Manual (repair manual). Page 85

Read Sharp MX-PNX6 Service Manual online

MX-FN11  SELF DIAG MESSAGE AND TROUBLE CODE  9 – 1
MX-FN11
Service Manual
 
[9] SELF DIAG MESSAGE AND TROUBLE CODE
1. Self diagnosis
A. Finisher
B. Punch module (option)
Error
Condition
Timing of detection
Operation
Resetting
Stapler absent
The stapler is not set.
Monitoring at all times
Normal operation will continue; however, 
operation is subject to instructions from the 
host machine.
Replace the staple cartridge; 
or set it correctly.
Activated stapler 
safety interlock
The stapler safety interlock is 
activated.
When the staple 
operation is started.
Operation of staple motor (FFSM) is 
prohibited.
Delivery stack sheets without 
stapling.
Stack tray 
overstacking
The number of sheets deposited 
on the delivery tray has exceeded 
the limit imposed on the tray.
When an extra sheet 
is discharged.
Normal operation will continue.
Remove the sheets from the 
delivery tray.
Stapler jam
Staple edge cannot be aligned 
correctly.
During staple edge 
aligning operation
Normal operation will continue; however, 
operation is subject to instructions from the 
host machine.
Replace the staple cartridge, 
and execute the staple edge 
alignment again.
Error
Condition
Timing of detection
Operation
Resetting
Waste case full
The amount of waste paper in the 
waste case has reached the limit.
During punching
Normal operation will continue.
Remove the waste paper 
from the waste case.
Excess waste
The amount of waste paper in the 
waste case has exceeded the 
limit.
During punching
Punching is prohibited.
Remove the waste paper 
from the waste case.
Page of 100
Display

Click on the first or last page to see other MX-PNX6 service manuals if exist.