Read Sharp MX-PNX6 Service Manual online
SERVICE MANUAL
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
CONTENTS
CODE: 00ZMXFN11/S
2E
[1] PRODUCT OUTLINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[2] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
[3] EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . . . . . . . . . 3-1
[4] OPERATIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
[5] DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
[6] MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
[7] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
[8] SIMULATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
[9] SELF DIAG MESSAGE AND TROUBLE CODE . . . . . . . . . . . . . . . . . . . 9-1
[10] ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
DIGITAL FULL COLOR
MULTIFUNCTIONAL SYSTEM OPTION
FINISHER
PAPER PASS UNIT/PUNCH MODULE
MX-FN11
MX-RBX3
MX-PNX6A/B/C/D
MODEL
CONTENTS
[1] PRODUCT OUTLINE
1. Product outline . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[2] SPECIFICATIONS
1. MX-FN11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2. MX-RBX3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
3. MX-PNX6A/B/C/D. . . . . . . . . . . . . . . . . . . . . . . . 2-3
2. MX-RBX3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
3. MX-PNX6A/B/C/D. . . . . . . . . . . . . . . . . . . . . . . . 2-3
[3] EXTERNAL VIEWS AND INTERNAL STRUCTURES
1. Name and function of parts. . . . . . . . . . . . . . . . . 3-1
[4] OPERATIONAL DESCRIPTION
1. Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
2. Feed/drive system . . . . . . . . . . . . . . . . . . . . . . . 4-2
3. Intermediate stapling tray . . . . . . . . . . . . . . . . . . 4-5
4. Staple operation . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
5. Stack tray operation . . . . . . . . . . . . . . . . . . . . . 4-10
6. Punch module. . . . . . . . . . . . . . . . . . . . . . . . . . .4-11
7. Detecting jams . . . . . . . . . . . . . . . . . . . . . . . . . 4-15
8. Power supply system . . . . . . . . . . . . . . . . . . . . 4-17
2. Feed/drive system . . . . . . . . . . . . . . . . . . . . . . . 4-2
3. Intermediate stapling tray . . . . . . . . . . . . . . . . . . 4-5
4. Staple operation . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
5. Stack tray operation . . . . . . . . . . . . . . . . . . . . . 4-10
6. Punch module. . . . . . . . . . . . . . . . . . . . . . . . . . .4-11
7. Detecting jams . . . . . . . . . . . . . . . . . . . . . . . . . 4-15
8. Power supply system . . . . . . . . . . . . . . . . . . . . 4-17
[5] DISASSEMBLY AND ASSEMBLY
1. Finisher (MX-FN11) . . . . . . . . . . . . . . . . . . . . . . 5-1
2. Paper pass unit (MX-RBX3) . . . . . . . . . . . . . . . 5-37
3. Punch module (MX-PNX6A/B/C/D) . . . . . . . . . 5-41
2. Paper pass unit (MX-RBX3) . . . . . . . . . . . . . . . 5-37
3. Punch module (MX-PNX6A/B/C/D) . . . . . . . . . 5-41
[6] MAINTENANCE
1. Maintenance list . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
[7] ADJUSTMENTS
1. Finisher section. . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
2. Punch module (MX-PNX6A/B/C/D) . . . . . . . . . . 7-2
2. Punch module (MX-PNX6A/B/C/D) . . . . . . . . . . 7-2
[8] SIMULATION
1. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
2. Details of trouble code . . . . . . . . . . . . . . . . . . . . 8-1
2. Details of trouble code . . . . . . . . . . . . . . . . . . . . 8-1
[9] SELF DIAG MESSAGE AND TROUBLE CODE
1. Self diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
2. Trouble code . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
2. Trouble code . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
[10] ELECTRICAL SECTION
1. Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
2. Actual wiring chart . . . . . . . . . . . . . . . . . . . . . . 10-4
3. List of LED and check pin for PCB . . . . . . . . . 10-10
2. Actual wiring chart . . . . . . . . . . . . . . . . . . . . . . 10-4
3. List of LED and check pin for PCB . . . . . . . . . 10-10
MX-FN11 PRODUCT OUTLINE 1 – 1
MX-FN11
Service Manual
[1] PRODUCT OUTLINE
1. Product outline
This machine, a posttreatment device for paper used for copy or fax machines, can be used with the host machine shown below. It features the
offset system that allows feeding of output sheet to the finisher by the paper pass unit (MX-RBX3) and offset delivery of paper for every set of
job.
1) Three types of auto-stapling: Three types of stapling positions are available. (One-point stapling in the front, one-point stapling at the back,
offset system that allows feeding of output sheet to the finisher by the paper pass unit (MX-RBX3) and offset delivery of paper for every set of
job.
1) Three types of auto-stapling: Three types of stapling positions are available. (One-point stapling in the front, one-point stapling at the back,
two-point stapling at the center)
2) Punch system (optional): With the punch module installed, paper can be punched for a binder before delivery (applicable to paper of
weight ranged from 55 to 256 g/m
2
, but inapplicable to OHP film).
Staple cartridges are required for the finisher as a consumable.
(Staple cartridge [Approx. 5000 pcs. x 3 sets] AR-SC2)
(Staple cartridge [Approx. 5000 pcs. x 3 sets] AR-SC2)
Applicable model
MX-4100FN/5000FN
MX-4101FN/5001FN
MX-4101FN/5001FN
MX-FN11
MX-FN11 SPECIFICATIONS 2 – 1
MX-FN11
Service Manual
[2] SPECIFICATIONS
1. MX-FN11
Model
MX-FN11
Name
Finisher
Type
Floor stand type
Transport reference
Center reference
Stack system
Upper/lower:Lift type offset tray
Mode type
Non staple, staple
Reliability
MCBJ: Conforms to the main unit
MCBF:Conforms to the main unit
Life
Conforms to the main unit
Power consumption
140W
Power source
Domestic: Supplied from the main unit
Overseas: Supplied from the main unit
Dimensions(WxDxH mm)
515x650x1100mm
20 9/32 x 25 13/32 x 43 19/64 inch
Occupied dimensions(WxD mm)
645x650mm
25 25/64 x 25 13/32 inch
Weight
Approx. 45kg, 99.2 lbs
Stacker section
Size/weight of paper to be
delivered
Size/weight of paper to be
delivered
Refer to Table 1.
Size/weight of paper to be offset
Offset
Offset
30mm
Stacking
performance
performance
Non offset
Horizontal offset: 30mm or less, top offset: 50 mm or less, (in the non staple mode on the offset tray)
Offset
Horizontal offset in stack:15mm or less, horizontal offset between stacks: 15mm or more
Alignment performance
Max. offset width: 2.5mm
Paper detection
Available
Output paper
capacity
capacity
Upper tray
1550 sheets (A4, 8.5x11,in the non-staple mode)
As for the number of sheets to be stacked and limitations depending on the size, refer to Table 2.
Lower tray
2450 sheets (A4, 8.5x11,in the non-staple mode)
As for the number of sheets to be stacked and limitations depending on the size, refer to Table 2.
Staple section
Staple position
One-point staple in the front (slant)
One-point staple at the back (slant)
Two-point staple
Size/weight of paper to be stapled
Refer to Table 1.
Number of sheets to be stapled
(80g/m
(80g/m
2
)
50 sheets (A4, 8.5x11), in the mix staple mode: 30 sheets
Max.: 2 sheets of 256g/m
2
paper+48 sheets of 80g/m
2
paper
As for the number of sheets to be stacked and limitations depending on the size, refer to Table 1.
Staple load system
Staple cartridge (5000 staples)
Staple empty detection
Available
Manual staple mode
Not available