Read Sharp MX-PEX1 (serv.man4) Service Manual online
MX-PEX1 Unpacking, installtion 1 – 4
G. Note for network setting and calibration re-
setting
CAUTION: After the MX-PEX1 is installed, be sure the setting of
items as follows again.
(Reconfiguration in setting is required, because the
information that had been keeping before installa-
tion is initialized.)
(Reconfiguration in setting is required, because the
information that had been keeping before installa-
tion is initialized.)
1)
System setting
→ Printer Setting (administrator area) → Fiery
Setting
→ Carry out the initial setting from Fiery menu.
2)
After the initial setting and automatic reboot
→ Printer Setting
(administrator area)
→ Fiery Setting → Carry out the calibra-
tion from Fiery menu again.
(1) About the Fiery Setting
Refer to the configuration manual "SETTING UP THE FIERY
X3ETY2 FROM THE COPIER TOUCH PANEL".
X3ETY2 FROM THE COPIER TOUCH PANEL".
(2) About the calibration
Refer to the color printing manual "Calibration".
1)
1)
To execute the calibration from the touch panel of Copier, refer
to the "Calibrating from the Fiery X3eTY2 copier touch panel".
to the "Calibrating from the Fiery X3eTY2 copier touch panel".
2)
To execute the calibration with a color measurement meter,
refer to the "Calibrating with ColorWise Pro Tools Calibrator".
refer to the "Calibrating with ColorWise Pro Tools Calibrator".
CAUTION:
Click on the first or last page to see other MX-PEX1 (serv.man4) service manuals if exist.