Read Sharp MX-PEX1 (serv.man4) Service Manual online
INSTALLATION MANUAL
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
CHAPTER 1. Unpacking, instralltion
1.Unpacking ................................................................. 1-1
2.Installation ................................................................. 1-1
CONTENTS
CODE: 00ZMXPEX1/I1E
DIGITAL FULL COLOR
MULTIFUNCTIONAL SYSTEM OPTION
PRINT CONTROLLER UNIT
MODEL
MX-PEX1
MX-PEX1 Unpacking, installtion 1 – 1
MX-PEX1
Service Manual
[1] Unpacking, installtion
1. Unpacking
A. Removal of the print controller unit
1)
Remove the print controller unit.
B. Check the packed items
• Check that all the items shown in 1) are included in the package.
2. Installation
<Note before installation>
* Start installation after checking that the LINE indicator and the
* Start installation after checking that the LINE indicator and the
DATA indicator below it on the operation panel are neither lit nor
blinking.
blinking.
A. Turn off the power of the main unit
1)
Turn the power switch located on the operation panel to the
"OFF" position.
"OFF" position.
2)
After checking that the operation panel has gone out, open the
front cabinet and turn the main power switch to the “OFF” opsi-
tion.
front cabinet and turn the main power switch to the “OFF” opsi-
tion.
3)
Remove the power plug of the main unit from the outlet.
No.
Names of bundles
Quantity
1
I/F unit
1
2
Step screw
2
3
LAN cable (cross cable)
1
4
AC power cable
1
5
Caution label
1
6
CD-ROM
5
7
Quick guide
1
8
Release notes
1
9
KODAK chart
1
1
4
2
3
6
7
8
5
9
OFF
OFF
OFF
MX-PEX1 Unpacking, installtion 1 – 2
B. Install of the I/F unit
1)
Remove the ozone filter cover. Remove the screws, and
remove the right rear cabinet cover.
remove the right rear cabinet cover.
2)
Remove the screws, and pull out the MFP cnt PWB unit.
3)
Remove the three screws of the MFP cnt PWB. Install the I/F
unit (package part No. 1) with the three screws that was
detached from MFP cnt PWB.
* When installing the I/F unit, use an extreme care to make
unit (package part No. 1) with the three screws that was
detached from MFP cnt PWB.
* When installing the I/F unit, use an extreme care to make
the sheet metal not come in contact with the MFP cnt PWB.
4)
Restore the MFP cnt PWB unit to the main unit, and fix with the
screws.
screws.
5)
Cut out the cut-out portion of the right rear cabinet cover for
cable along the perforated line. Attach the right rear cabinet
cover, and fix with the screw. Attach the ozone filter cover.
cable along the perforated line. Attach the right rear cabinet
cover, and fix with the screw. Attach the ozone filter cover.
C. Installation of the printer controller
1)
Remove the four screws from the rear cabinet. Attach two step
screws (package part No. 1) to the two positions in four posi-
tions where the fixing screws have been removed.
screws (package part No. 1) to the two positions in four posi-
tions where the fixing screws have been removed.
2)
Engage the printer controller unit with the step screws, and
slide it to the right door side.
slide it to the right door side.
3
2
1
1
2
3
4
3
2
1
D01000221202G
1
1
1
1
2
1
2
MX-PEX1 Unpacking, installtion 1 – 3
3)
Fix the print controller unit using the two screws of the four
screws removed in step 1.
screws removed in step 1.
D. Connector connection
1)
Connect the cable (A) of the I/F unit, the LAN cable (package
part No. 3), and the AC power cord (C) (package part No. 4).
part No. 3), and the AC power cord (C) (package part No. 4).
E. Caution label attachment
1)
Attach the caution label (package part No. 5) near a AC power
cord inlet of the main unit.
cord inlet of the main unit.
F. Turn on the power switch of the print
controller unit and the main unit
1)
Insert the power plug of the print controller unit into the power
outlet.
outlet.
2)
Insert the power plug of the main unit to the outlet.
3)
Turn on the power switch of the print controller unit.
4)
Open the front cabinet. Turn ON the power switch in the front
cabinet of the main unit.
cabinet of the main unit.
5)
Turn ON the power switch on the operation panel.
A
B
C
ON
ON
ON
ON