MX-PEX1 (serv.man13). Fiery PEX1 Configuration Setup Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 14

To prepare for printing at your site, you must do some initial Fiery X3eTY2 configuration 
(or “Setup”) to specify the network environment and the types of printing you do. Before you 
perform Setup, decide the levels of access to implement, such as passwords and other security 
features that the Fiery X3eTY2 offers. Because many of these security features are 
interconnected, review the information in this chapter to plan for an effective security system, 
and then perform Setup accordingly.

When you configure the Fiery X3eTY2 during Setup, you (as system administrator) 
implement a particular level of control by configuring these elements:

• Users and Groups

• Print connections

• Access to WebTools

With the Configure WebTool, you create users, assign passwords, create groups with 
particular privileges, and assign users to the groups. Several groups are provided by default, 
and you can create new groups. All the users in a group have the same privileges. 

In addition to assigning the users that you have created to a group, you can add users from 
your organization’s global address list if you enable LDAP services on the Fiery X3eTY2. For 
more information, see WebTools Configure Help.

When you create new users, you assign passwords to them. In addition, you can also set 
passwords for these areas:

• Default admin user in Administrators group

• Default operator user in Operators group

By default, the default Administrator password is set on the Fiery X3eTY2. Change the 
Administrator password periodically to protect the Fiery X3eTY2 from random or accidental 
changes to Setup. For more information, see 

For the default password, contact your authorized installation/service representative.