Read Sharp MX-PEX1 (serv.man13) User Guide / Operation Manual online
C
ONNECTING
TO
THE
N
ETWORK
13
To the end of the NetWare queue names, append one of the following suffixes that
corresponds to the Fiery X3eTY2 print connection, as follows:
corresponds to the Fiery X3eTY2 print connection, as follows:
_print
_hold
_direct
_hold
_direct
N
OTE
:
These suffixes must be in English and in all lowercase letters.
You do not need to perform Setup when you add or remove a NetWare queue. However,
always restart the Fiery X3eTY2 after you create or remove a queue that will be connected to
the print server used by the Fiery X3eTY2.
always restart the Fiery X3eTY2 after you create or remove a queue that will be connected to
the print server used by the Fiery X3eTY2.
When the Fiery X3eTY2 is configured to connect to a NetWare server, it polls the NetWare
server for jobs in each of its queues. If jobs are found, they are automatically transferred over
the network to the matching connection on the Fiery X3eTY2. For example, jobs from the
NetWare queue with the
server for jobs in each of its queues. If jobs are found, they are automatically transferred over
the network to the matching connection on the Fiery X3eTY2. For example, jobs from the
NetWare queue with the
_print
suffix are sent to the Fiery X3eTY2 Print queue.
• You can connect up to eight bindery servers to the Fiery X3eTY2.
N
OTE
:
The NetWare bindery server you select must not be in the same tree as the one you
selected in NDS Setup, if both NDS and bindery are used by the Fiery X3eTY2.
AppleTalk networks
AppleShare servers require no special configuration.
UNIX networks
• When you configure a UNIX workstation with the lpr protocol and connect to the Fiery X3eTY2
over a TCP/IP network, you can print directly to the Fiery X3eTY2.
• Setting up UNIX workstations requires an administrator with root privileges. After the initial
configuration, UNIX users submit print jobs to a named printer.
• The Fiery X3eTY2 is a printer controller that understands lpr protocols.
• The Fiery X3eTY2 has a remote printer name you must use in order to communicate with it
successfully.
Regardless of the UNIX system you use, the name you use for the remote printer (or
rp
in the
/etc/printcap
file) in configuring the network for the Fiery X3eTY2 must be one of the
following
:
print
hold
direct
hold
direct
Workstations on a TCP/IP network can print directly to the Fiery X3eTY2 as a remote
printer, or can print to a Windows 2000/Server 2003 server or UNIX workstation acting as a
print server.
printer, or can print to a Windows 2000/Server 2003 server or UNIX workstation acting as a
print server.
Click on the first or last page to see other MX-PEX1 (serv.man13) service manuals if exist.