MX-PEX1 (serv.man13). Fiery PEX1 Configuration Setup Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 12

Read Sharp MX-PEX1 (serv.man13) User Guide / Operation Manual online

C
ONNECTING
 
TO
 
THE
 N
ETWORK
12
Network server setup requirements
This section provides basic information about configuring the Fiery X3eTY2 and using it on 
the network. It does not explain network functions for printing in general. Only information 
specific to the Fiery X3eTY2 is presented. Setting up the network environment correctly 
requires the presence and active cooperation of the network administrator. Detailed 
instructions for configuring networks is beyond the scope of this document. For information, 
see the documentation that accompanies your network system. 
Configure the network and servers, and ensure that there is a live network connection before 
you configure Fiery X3eTY2 network settings in Setup. This allows the Fiery X3eTY2 to 
query the network for zones, servers, and server-based queues.
Whenever you change the configuration of the Fiery X3eTY2, MFP, or network at your site, 
alter the settings to correspond to the changed environment. Changing network or port 
settings may require that you make changes to other Setup options, as well.
Windows networks
• The Fiery X3eTY2 requires a valid IP address, subnet mask, and gateway address. 
Enter these addresses manually or use DHCP or BOOTP protocols to assign them 
dynamically. Make sure the Fiery X3eTY2 name and address are listed in a domain name 
server (DNS) or hosts name database used by your system.
If more than one Fiery X3eTY2 print connection is published (for example, if both the Print 
queue and the Hold queue are published), consider creating a printer for each print 
connection, so that users can print to each connection directly.
• Configure the Fiery X3eTY2 with the correct Windows domain name. 
This is especially important for Windows printing, also known as SMB printing.
To use Microsoft Active Directory, you must assign the Fiery X3eTY2 to a domain. If you 
assign the Fiery X3eTY2 to a workgroup, you cannot use Active Directory.
NetWare networks
• You must have administrator privileges on the network to create new NDS or bindery objects. 
For more information, see the documentation that accompanies your network system.
• You can configure a single directory tree and up to eight bindery servers simultaneously. 
• The Fiery X3eTY2 looks for print jobs on one NetWare print server per bindery server.
NetWare file servers support the creation of print queues, which are storage areas for print 
jobs. When a client on a remote computer decides to print, the job is directed to a Print queue 
on the NetWare file server and spooled to the NetWare server disk, freeing up the client 
workstation.
Page of 86
Display

Click on the first or last page to see other MX-PEX1 (serv.man13) service manuals if exist.