Read Sharp MX-PE12 FIERY Service Manual online
68
Service Guide: Fiery® Server MX-PE12
Troubleshooting
System software installation (continued)
The LED on the MX-
PE12 shows error codes
EE
PE12 shows error codes
EE
-> 02.-> EE -> 02....
This is not supported server.
Product information is found, but the installer does not
support this product.
support this product.
The LED on the MX-
PE12 shows error codes
EE
PE12 shows error codes
EE
-> 09.-> EE -> 09....
Hard disk drive is missing.
Check the MX-PE12 to verify the hard disk drive installation.
The LED on the MX-
PE12 shows error codes
EE
PE12 shows error codes
EE
-> 43.-> EE -> 43....
Failed to format the hard disk drive.
Replace the hard disk drive.
The LED on the MX-
PE12 shows error codes
EE
PE12 shows error codes
EE
-> 44.-> EE -> 44....
The USB device may have a
corrupted image file, or your hard
disk drive cannot be accessed.
corrupted image file, or your hard
disk drive cannot be accessed.
1 Run Windows Disk Error Check on the USB device.
2 Prepare the USB device again using the Fiery USB Setup
Tool.
3 Use another computer with an external connection to
format the hard disk drive, if the installer cannot write to
the hard disk drive.
the hard disk drive.
4 If the above actions do not work, replace the hard disk drive.
The LED on the MX-
PE12 shows error codes
EE
PE12 shows error codes
EE
-> 45.-> EE -> 45....
Failed to install bootloader.
1 Use another computer with an external connection to
format the hard disk drive, if the installer cannot write to
the hard disk drive.
the hard disk drive.
2 If the above actions do not work, replace the hard disk drive.
Backup and restore
The LED on the MX-
PE12 shows error codes
EE
PE12 shows error codes
EE
-> 21.-> EE -> 21....
Failed to mount hard disk drive
partition.
partition.
The MX-PE12 is not properly installed. Reinstall the MX-PE12.
The LED on the MX-
PE12 shows error codes
EE
PE12 shows error codes
EE
-> 43.-> EE -> 43....
Failed to format the hard disk drive.
Replace the hard disk drive.
The LED on the MX-
PE12 shows error codes
EE
PE12 shows error codes
EE
-> 44.-> EE -> 44....
The USB device may have a
corrupted image file, or your hard
disk drive cannot be accessed.
corrupted image file, or your hard
disk drive cannot be accessed.
1 Run Windows Disk Error Check on the USB device.
2 Prepare the USB device again using the Fiery USB Setup
Tool.
3 Use another computer with an external connection to
format the hard disk drive, if the installer cannot write to
the hard disk drive.
the hard disk drive.
4 If the above actions do not work, replace the hard disk drive.
Symptom
Possible cause
Suggested action
Click on the first or last page to see other MX-PE12 FIERY service manuals if exist.