Read Sharp MX-PE10 FIERY (serv.man2) Service Manual online
U
SING
THE
F
IERY
S
ERVER
25
Fiery Server control panel Functions menu
The following options are available from the Fiery Server Functions menu:
•
MB Replacement:
Allows you to transfer any options stored in the hard disk drive of the
Fiery Server into a new motherboard.
N
OTE
:
The MB Replacement option appears only when you insert the motherboard
replacement dongle into a USB port.
•
Eject CD/DVD:
Allows you to eject media from the DVD drive. Media is also automatically
ejected whenever the Fiery Server is restarted, shut down, or rebooted. A hardware eject
button is also located below the disc slot.
button is also located below the disc slot.
•
IP Address:
Displays the current IP address of the Fiery Server.
•
Restart Server:
Includes options to Restart (soft reset) or Reboot (hard reset) the Fiery
Server. Selecting Restart resets the Fiery Server server software, but does not reboot the
entire system. Selecting Reboot shuts down all Fiery Server activity and reboots the system.
When you select Restart or Reboot, network access to the Fiery Server is temporarily
interrupted and all currently processing jobs are aborted and may be lost.
entire system. Selecting Reboot shuts down all Fiery Server activity and reboots the system.
When you select Restart or Reboot, network access to the Fiery Server is temporarily
interrupted and all currently processing jobs are aborted and may be lost.
•
Shut Down Server:
Shuts down all Fiery Server server software and powers off the system.
Always select this option to power off the system.
N
OTE
:
Avoid using the reset button on the front panel, as doing so may cause the system to
operate unpredictably. Use the reset button on the front of the Fiery Server only if the system
is unresponsive to keyboard or mouse actions.
is unresponsive to keyboard or mouse actions.
Network status LEDs
Two LEDs next to the Ethernet connector indicate the network speed. When a data transfer
occurs between the Fiery Server and the network, the appropriate LED(s) blink to indicate
network activity. For additional network information, see Configuration and Setup, which is
part of the user documentation set.
occurs between the Fiery Server and the network, the appropriate LED(s) blink to indicate
network activity. For additional network information, see Configuration and Setup, which is
part of the user documentation set.
N
OTE
:
Network connectivity is supported only through the upper RJ-45 port on the Fiery
Server connector panel. The lower port is the scan interface. The network and scan cables
look similar, but are not interchangeable. Make sure not to swap the cables. (For the correct
connections, see
look similar, but are not interchangeable. Make sure not to swap the cables. (For the correct
connections, see
page 29
).
Network link speed
LED 1
LED 2
10 Megabits/second
Off
Green
100 Megabits/second
Green
Green
1000 Megabits/second
Amber
Green
LED 2
LED 1
Ethernet network port
(Upper RJ-45)
(Upper RJ-45)
Click on the first or last page to see other MX-PE10 FIERY (serv.man2) service manuals if exist.