Read Sharp MX-M950 / MX-MM1100 (serv.man50) User Guide / Operation Manual online
87
PROBLEMS RELATED TO PAPER FEEDING AND
OUTPUT
OUTPUT
Problem
Point to check
Solution
The original misfeeds
(automatic document
feeder).
(automatic document
feeder).
Is too much paper loaded in document
feeder tray?
feeder tray?
Make sure that the stack of paper in the tray is not
higher than the indicator line.
higher than the indicator line.
☞
PLACING ORIGINALS IN THE AUTOMATIC
DOCUMENT FEEDER
DOCUMENT FEEDER
(page 53)
Is the original a long original?
When using the automatic document feeder to scan a
long original, set the scan size to [Long Size]. (Note that
long originals cannot be copied using the copy function.)
long original, set the scan size to [Long Size]. (Note that
long originals cannot be copied using the copy function.)
Is the original on thin paper?
Use the document glass to scan the original. If you need
to use the automatic document feeder, use slow scan
mode in the special modes to scan the original.
to use the automatic document feeder, use slow scan
mode in the special modes to scan the original.
The paper misfeeds.
Is a torn piece of paper remaining in the
machine?
machine?
Make sure all paper is removed.
☞
"3. REMOVING MISFEEDS" in the Maintenance
Guide
Guide
Is too much paper loaded in the tray?
Make sure that the stack of paper in the tray is not
higher than the indicator line.
higher than the indicator line.
☞
2. LOADING PAPER
(page 26)
Are multiple sheets feeding at once?
Fan the paper well before loading it.
Are you using paper that is not within
the specifications?
the specifications?
Use SHARP-recommended paper. Using paper that is
not supported may result in misfeeds, creases, or
smudges.
not supported may result in misfeeds, creases, or
smudges.
☞
"SUPPLIES" in the Safety Guide
* For paper that is prohibited or not recommended, see
"
USEABLE PAPER
" (page 27).
Has the paper in the tray absorbed
moisture?
moisture?
If you will not be using paper in a tray for a long time,
remove the paper from the tray and store it in a bag in a
dark and dry location.
remove the paper from the tray and store it in a bag in a
dark and dry location.
Are the bypass tray guides adjusted to
the width of the paper?
the width of the paper?
Adjust the bypass tray guides to the width of the paper.
☞
LOADING PAPER IN THE BYPASS TRAY
(page
48)
Is the bypass tray extension pulled out?
When loading a large size of paper, pull out the
extension.
extension.
☞
LOADING PAPER IN THE BYPASS TRAY
(page
48)
Is the bypass feed roller dirty?
Clean the surface of the bypass feed roller.
☞
"CLEANING THE BYPASS FEED ROLLER" in the
Maintenance Guide
Maintenance Guide
Click on the first or last page to see other MX-M950 / MX-MM1100 (serv.man50) service manuals if exist.