MX-M950, MX-MM1100 (serv.man50). User Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 84

• System settings

Descriptions of system settings similar to the following example appear in this chapter. 
Example:
➞ System Settings (Administrator) > "Copy Function Settings" > "Other Settings" > "Rotation Copy Setting" > 
This is an abbreviated description of the procedure for selecting the setting. ">" indicates the setting sequence and 

 indicates the state of the setting after it has been enabled. Use these descriptions as a quick manual to help you 

configure the settings. (For detailed explanations of the system settings (Administrator), see the Administrator's 
Guide.)

• For problems common to all functions of the machine and peripheral devices, see this manual.

• If you are unable to solve a problem using the solutions in this chapter, switch off the [POWER] key (

) and the 

main power switch. Wait at least 10 seconds, and then switch on the main power switch and the [POWER] key (

) 

in that order.

* Do not turn off the machine's main power switch or remove the power plug while a job is being executed or 

processed. This may damage the hard drive or cause the data being stored or received to be lost.

• If you are unable to solve a problem using the information in this chapter, please contact your dealer or nearest 

SHARP Service Department.

Have functions been disabled by the 
administrator?

Some functions may have been disabled in the system 
settings (administrator). Check with your administrator.
When user authentication is enabled, the functions that 
you can use and page counts may be restricted in your 
user settings. Check with your administrator.