Read Sharp MX-M950 / MX-MM1100 (serv.man50) User Guide / Operation Manual online
90
PROBLEMS RELATED TO PERIPHERAL DEVICES
Part of the image is
cut off.
cut off.
Has the correct paper size been set?
If you are using a special size, be sure to specify the
paper size.
If the size of paper loaded in a tray was changed, be
sure to check the paper size setting.
paper size.
If the size of paper loaded in a tray was changed, be
sure to check the paper size setting.
☞
PAPER TRAY SETTINGS
(page 77)
Was the original placed in the correct
position?
position?
If you are using the document glass, be sure to place
the original in the far left corner of the document glass.
the original in the far left corner of the document glass.
☞
PLACING ORIGINALS IN THE AUTOMATIC
DOCUMENT FEEDER
DOCUMENT FEEDER
(page 53)
Printing takes place
on the wrong side of
the paper.
on the wrong side of
the paper.
Is the paper loaded with the print side
facing in the correct direction?
facing in the correct direction?
• Trays 1 to 4:
Load the paper with the front side facing up*.
• Bypass tray and tray 5:
Load the paper with the front side facing down*.
* When the paper type is "Pre-Printed" or "Letter Head",
load the paper in the opposite way. (Except when
"Disabling of Duplex" is enabled in the system settings
(administrator). For the current setting, check with your
administrator.)
"Disabling of Duplex" is enabled in the system settings
(administrator). For the current setting, check with your
administrator.)
Problem
Point to check
Solution
The connected USB
device cannot be
used.
device cannot be
used.
Is the USB device compatible with the
machine?
machine?
Ask your dealer if the device is compatible with the
machine.
machine.
Is the connected USB device
recognized correctly?
recognized correctly?
Use "USB-Device Check" in the system settings to
check whether or not the device can be recognized.
check whether or not the device can be recognized.
☞
USB-DEVICE CHECK
(page 81)
If it is not recognized, connect it once again.
The finisher / saddle
unit / saddle stitch
finisher / inserter /
folding unit does not
operate.
unit / saddle stitch
finisher / inserter /
folding unit does not
operate.
Does a message appear indicating that
you need to remove paper from the
stapler compiler?
you need to remove paper from the
stapler compiler?
Remove all remaining paper from the stapler compiler.
Is the [START] key (
) indicator on
the operation panel turned off?
Configure the settings of punching or stapling on the
operation panel of the inserter. For more information,
see "
operation panel of the inserter. For more information,
see "
MANUAL FINISHING MODE
" (page 65)
Does an error message appear?
When the operation does not take place due to the
problem such as paper misfeeds, you will be informed
by the indicators that are lit and/or blinking on the
operation panel.
problem such as paper misfeeds, you will be informed
by the indicators that are lit and/or blinking on the
operation panel.
Does the following message appear in
the touch panel?
"Call for service. Code:xx-xx* Please
check the power of the finisher."
*Letters and numbers appear in xx-xx.
the touch panel?
"Call for service. Code:xx-xx* Please
check the power of the finisher."
*Letters and numbers appear in xx-xx.
Check peripheral devices and the power plug. Remove
and then firmly reinsert the power plug, and restart the
machine.
and then firmly reinsert the power plug, and restart the
machine.
Have functions been disabled by the
administrator?
administrator?
Some functions may have been disabled in the system
settings (administrator). Check with your administrator.
settings (administrator). Check with your administrator.
Problem
Point to check
Solution
Click on the first or last page to see other MX-M950 / MX-MM1100 (serv.man50) service manuals if exist.