Read Sharp MX-M850 (serv.man36) Service Manual online
MX-M1100 ADJUSTMENTS 6 – 79
Automatic adjustment items of Sim. 50-28 and the correspond-
ing manual adjustment items, simulation
ing manual adjustment items, simulation
(Sim. 50-28 mode menu)
21-A
Automatic main scanning direction print
image magnification ratio adjustment
(Corresponding to ADJ3B)
image magnification ratio adjustment
(Corresponding to ADJ3B)
1)
Enter the Sim. 50-28 mode.
2)
Press [BK-MAG ADJ] button to select [BK-MAG ADJ] mode.
3)
Select the paper feed tray with A4/11
✕ 8.5 paper init with the
paper feed tray button. (A4/11
✕ 8.5)
4)
Press [EXECUTE] key.
The adjustment pattern is printed.
The adjustment pattern is printed.
5)
Set the adjustment pattern on the document table. (No need to
take care of the setting direction.)
Note: Set the adjustment pattern so that it fits precisely with
the document guide.
take care of the setting direction.)
Note: Set the adjustment pattern so that it fits precisely with
the document guide.
Automatic adjustment
items
Corresponding manual
adjustment items, simulation
OC ADJ
(Corresponding to ADJ8A)
(Corresponding to ADJ7B)
(Corresponding to Sim.50-1 RRC-A)
(Corresponding to ADJ7B)
(Corresponding to Sim.50-1 RRC-A)
BK-MAG ADJ
(Corresponding to ADJ3B)
SPF ADJ
(Corresponding to ADJ9C)
(Corresponding to ADJ8B)
(Corresponding to ADJ8C)
(Corresponding to ADJ7E)
(Corresponding to ADJ8B)
(Corresponding to ADJ8C)
(Corresponding to ADJ7E)
SETUP/PRINT ADJ
(Corresponding to ADJ3C)
(Corresponding to Sim.50-1 RRC-B)
(Corresponding to Sim.50-1 RRC-B)
Section
Adjustment item
Adjust
ment
menu
Scanner
OC
Scan image lead edge
reference position
adjustment
reference position
adjustment
OC ADJ
Scan image off-center
adjustment
Sub scanning direction scan
image magnification ratio
adjustment
adjustment
Sub scanning direction scan
image magnification ratio
adjustment
DSPF
SIDE1
(Front
surface)
(Front
surface)
Scan image lead edge
reference position
adjustment
reference position
adjustment
SPF ADJ
(DSPF)
Scan image off-center
adjustment
Sub scanning direction scan
image magnification ratio
adjustment
adjustment
Sub scanning direction scan
image magnification ratio
adjustment
SIDE2
(Back
surface)
(Back
surface)
Scan image lead edge
reference position
adjustment
Scan image off-center
adjustment
Sub scanning direction scan
image magnification ratio
adjustment
reference position
adjustment
Scan image off-center
adjustment
Sub scanning direction scan
image magnification ratio
adjustment
Engine
—
Main scanning direction print
image magnification ratio
adjustment
image magnification ratio
adjustment
BK-MAG
ADJ
CS (Common to
paper feed trays)
paper feed trays)
Print image lead edge
position adjustment
position adjustment
SETUP/
PRINT
CS1
Print image off-center
adjustment
adjustment
ADJ
CS2
Print image off-center
adjustment
adjustment
CS3
Print image off-center
adjustment
adjustment
CS4
Print image off-center
adjustment
adjustment
ADU
Print image off-center
adjustment
Print image lead edge
position adjustment
adjustment
Print image lead edge
position adjustment
MFT
Print image off-center
adjustment
adjustment
LCC1 (LCC)
Print image off-center
adjustment
adjustment
LCC2
Print image off-center
adjustment
adjustment
LCC3
Print image off-center
adjustment
adjustment
SIMULATION NO.50-28
TEST
AUTO IMAGE POSITION ADJUSTMENT : SERVICE
OC ADJ
BK-MAG ADJ
SPF ADJ
SETUP/PRINT ADJ
RESULT
DATA
1/1
CLOSE
SIMULATION NO.50-28
TEST
AUTO IMAGE POSITION ADJUSTMENT : SERVICE
EXECUTE
1/1
MFT
CS1
CS4
CS2
CS3
CLOSE
Click on the first or last page to see other MX-M850 (serv.man36) service manuals if exist.