Read Sharp MX-M850 (serv.man36) Service Manual online
MX-M1100 ADJUSTMENTS 6 – 76
2)
Set the paper feed guide to the maximum width, and press
[EXECUTE] key.
[EXECUTE] key.
[EXECUTE] key is highlighted. When the maximum width
detection level adjustment value is saved, [EXECUTE] key
returns to the normal display.
detection level adjustment value is saved, [EXECUTE] key
returns to the normal display.
Adjustment steps and display contents
3)
Set the paper feed guide to the minimum width, and press
[EXECUTE] key.
[EXECUTE] key is highlighted. When the minimum width
detection level adjustment value is saved, [EXECUTE] key
returns to the normal display.
[EXECUTE] key.
[EXECUTE] key is highlighted. When the minimum width
detection level adjustment value is saved, [EXECUTE] key
returns to the normal display.
After completion of the adjustment, "COMPLETE" is displayed.
16-C
DSPF paper feed tray paper width sensor
adjustment
adjustment
This adjustment is required in the following cases:
* When the DSPF paper feed tray section is disassembled.
* When the DSPF paper feed tray section is replaced.
* When the U2 trouble occurs.
* When the scanner PWB is replaced.
* When the EEPROM on the scanner PWB is replaced.
* When the DSPF paper feed tray section is disassembled.
* When the DSPF paper feed tray section is replaced.
* When the U2 trouble occurs.
* When the scanner PWB is replaced.
* When the EEPROM on the scanner PWB is replaced.
1)
Enter the Sim. 53-6 mode.
2)
Set the DSPF paper feed guide to the maximum width, and
press [EXECUTE] key.
press [EXECUTE] key.
[EXECUTE] key is highlighted. When the maximum width
detection level adjustment value is saved, [EXECUTE] key
returns to the normal display.
Adjustment steps and display contents
detection level adjustment value is saved, [EXECUTE] key
returns to the normal display.
Adjustment steps and display contents
3)
Set the DSPF paper feed guide to the A4R width, and press
[EXECUTE] key.
[EXECUTE] key is highlighted. When the A4R size width
detection level adjustment value is saved, [EXECUTE] key
returns to the normal display.
[EXECUTE] key.
[EXECUTE] key is highlighted. When the A4R size width
detection level adjustment value is saved, [EXECUTE] key
returns to the normal display.
4)
Set the DSPF paper feed guide to the A5R width, and press
[EXECUTE] key.
[EXECUTE] key is highlighted. When the A5R size width
detection level adjustment value is saved, [EXECUTE] key
returns to the normal display.
[EXECUTE] key.
[EXECUTE] key is highlighted. When the A5R size width
detection level adjustment value is saved, [EXECUTE] key
returns to the normal display.
Display/Item
Content
MAX POSITION
Maximum width detection level adjustment
MIN POSITION
Minimum width detection level adjustment
Display/Item
Content
TRAYVOLMAX
Maximum width detection level adjustment
TRAYVOLA4R
A4R width detection level adjustment
TRAYVOLA5R
A5R width detection level adjustment
TRAYVOLMIN
Minimum width detection level adjustment
0
SIMULATION NO.53̆06
TEST
SPF TRAY ADJUSTMENT
CLOSE
EXECUTE
TRAYVOLMAX TRAY ADJUSTMENT.
PRESS [EXECUTE] TO START
Click on the first or last page to see other MX-M850 (serv.man36) service manuals if exist.