Read Sharp MX-M850 (serv.man20) Service Manual online
MX-M1100 PHOTOCONDUCTOR SECTION i – 7
6. Disassembly and assembly
A. Process unit
* When disassembling or assembling the process unit, remove the
OPC drum unit by the following and keep it for a while.
1)
Remove the blue screw (a), and open the frame (b).
2)
Remove the OPC drum unit.
3)
Turn back the cover (a) that have been removed in step 2) of
"(1)-Process unit" procedure, and put the OPC drum unit on
the cover.
When putting the OPC drum unit on the cover, in advance
remove the bearing, place it according to "F" and "R" marked
on the cover (a).
Cover the OPC drum unit with paper to prevent exposure.
"(1)-Process unit" procedure, and put the OPC drum unit on
the cover.
When putting the OPC drum unit on the cover, in advance
remove the bearing, place it according to "F" and "R" marked
on the cover (a).
Cover the OPC drum unit with paper to prevent exposure.
(1) Process unit
1)
Open the front cover (a), and pull out the toner tray (b) slightly.
Unit
Parts
Page
Process unit
A
Process control sensor
i -9/a
B
Discharge lamp
C
Temperature humidity sensor 1
i -9/b
D
Surface potential sensor
E
PTDL PWB
F
DL PWB
i -10/c
G
Separation solenoid
i -11/d
B
G
E
D
C
A
F
a
a
b
a
R
F
a
a
b
Click on the first or last page to see other MX-M850 (serv.man20) service manuals if exist.