Read Sharp MX-M850 (serv.man16) Service Manual online
MX-M1100 TRAY PAPER FEED SECTION E – 2
Signal name
Name
Type
Function / Operation
C1SPD
Paper remaining quantity detector (Paper feed tray 1)
Transmission type
Paper remaining quantity detection. (Paper feed tray 1)
C1PED
Paper empty detector (Paper feed tray 1)
Photo interrupter
Paper empty detection.
C1PFD
Paper entry detector (Paper feed tray 1)
Reflection type
Detects paper pass.
C1LUM
Paper feed tray lift-up motor (Paper feed tray 1)
DC brush motor
Drives the lift plate of the paper feed tray.
C1LUD
Paper upper limit detection (Paper feed tray 1)
Photo interrupter
Detects lift up of the paper feed tray 1.
C1PUS
Paper pickup solenoid (Paper feed tray 1)
Electromagnetic clutch
Push down the paper pickup roller onto paper.
C1PFC
Paper feed clutch (Paper feed tray 1)
Electromagnetic clutch
Paper feed tray 1 section roller ON/OFF control.
C2SPD
Paper remaining quantity detector (Paper feed tray 2)
Transmission type
Paper remaining quantity detection. (Paper feed tray 2)
C2PED
Paper empty detector (Paper feed tray 2)
Photo interrupter
Paper empty detection.
C2PFD
Paper entry detector (Paper feed tray 2)
Reflection type
Detects paper pass.
C2LUM
Paper feed tray lift-up motor (Paper feed tray 2)
DC brush motor
Drives the lift plate of the paper feed tray.
C2LUD
Paper upper limit detection (Paper feed tray 1)
Photo interrupter
Drives the lift plate of the paper feed tray.
C2PUS
Paper pickup solenoid (Paper feed tray 2)
Electromagnetic clutch
Push down the paper pickup roller onto paper.
C2PFC
Paper feed clutch (Paper feed tray 2)
Electromagnetic clutch
Paper feed tray 1 section roller ON/OFF control.
TANSET
Paper feed tray 1/2 (Tandem tray) detection signal
Transmission type
Paper feed tray 1/2 (Tandem tray) insertion detection.
MM1
Paper feed motor 1
DC brushless motor
Drives paper feed section 1 and 2.
No.
Name
Function / Operation
1
Lift wire
Transmits drive power of the paper feed tray lift motor to the paper feed tray.
2
Paper feed table
Paper load on this table.
3
Paper feed tray unit 1, 2 regulation plates L/R
Regulates the paper width to restrick skew to minimize.
4
Pulley
Transmits drive power of the paper feed tray lift motor to the paper feed tray.
5
Paper pickup roller
Sends paper to the paper feed roller.
6
Separation roller
Sepatates paper to prevent against double feed.
7
Paper feed roller
Feeds paper to the paper transport section.
8
Torque limiter
Provides a certain level of resistance power for the paper separation roller rotation to prevent
against double feed.
against double feed.
Click on the first or last page to see other MX-M850 (serv.man16) service manuals if exist.