MX-M850 (serv.man16). Details of Each Section - E Tray Paper Feed Section - Sharp Copying Equipment Service Manual (repair manual). Page 9

MX-M1100  TRAY PAPER FEED SECTION  E – 9

1)

Remove the tray 3, 4 paper feed unit.

2)

Remove the screw (a), and remove the paper guide (b).

3)

Remove the screw (a) and the screw (b). Remove the cover
(c).

4)

Remove the screw (a), and remove the holder (b). Disconnect
the connector (c), and remove the cassette 3, 4 upper limit
detection (d). Disconect the connector (e), and remove the
screw (f). Remove the cassette 3, 4 paper empty detection (g).
* When installing the sensor, check that the boss (h) of the

sensor is securely engaged, and then fix it with the screw.

5)

Remove the screw (a), and remove the holder (b). Disconnect
the connector (c), and remove the screw (d). Remove the cas-
sette 3, 4 entry detection (e).
* When installing the sensor, check that the boss (f) of the

sensor is securely engaged, and then fix it with the screw.

6)

Disconnect the connector (a), and remove the screw (b).
Remove the cassette 3, 4 paper pickup solenoid unit (c).
* When installing, arrange so that the arm (d) comes under

the holder (e).

7)

Remove the screw (a), and remove the tray 3, 4 paper pickup
solenoid (b).
* When installing, check that the pin (c) of the solenoid is

securely engaged in the arm (d).

b

a

a

a

a

b

b

b

a

b

c

h

a

b

b

d

c

f

g

e

a

b

c

e

d

f

a

b

b

c

d

e

a

b

c

d