Read Harman Kardon GO PLAY WIRELESS (serv.man7) Service Manual online
harman/kardon
Service Manual
GO + PLAY Wireless
Portable Bluetooth loudspeaker
Released EU2013
Harman Consumer Group, Inc.
Rev 1, 08/2013
8500 Balboa Boulevard
Northridge, California 91329
CONTENTS
ESD WARNING
2
OWNER’S MANUAL
3
SPECIFICATION SHEET
9
EXPLODED VIEW AND PARTS
12
PARTS LIST
13
SCHEMATIC DIAGRAMS
14
Each precaution in this manual should be followed during servicing.
Components identified with the IEC symbol
in the parts list are special significance to safety. When replacing a component identified with
, use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the
parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts are acceptably
insulated from the supply circuit before retuming the product to the customer.
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called
Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field effect transistors and
semiconductor "chip" components.
The following techniques should be used to help reduce the incidence of component damage caused by static electricity.
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any electrostatic charge on
your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging wrist strap device,
which should be removed for potential shock reasons prior to applying power to the unit under test.
2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to
prevent electrostatic charge build-up or exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.
4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static" can generate electrical charges
sufficient to damage ES devices.
5. Do not use freon-propelled chemicals. These can generate electrical change sufficient to damage ES devices.
6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement
ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material.)
7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the
chassis or circuit assembly into which the device will be installed.
Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the brushing together
or your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity sufficient to damage an ES devices.
CAUTION :
harman/kardon
Go+Play Wireless Service Manual
Page 2 of 21
Wireless portable hi-fi speaker for iPad, iPhone and iPod
GO + PLAY
™
WIRELESS
Owner’s Manual
HARMAN KARDON
TM
harman/kardon
Go+Play Wireless Service Manual
Page 3 of 21
2
GO + PLAY WIRELESS
HARMAN KARDON
Welcome
Welcome
Thank you for purchasing the Harman Kardon Go + Play
™
Wireless portable hi-fi speaker for
iPhone/iPod and iPad. This system has been designed to meet the highest audio-performance
standards, and features HARMAN TrueStream, which guarantees peak wireless sound and
clarity. The Harman Kardon Go + Play Wireless system will meet all your listening and travel
needs, allowing you to immerse yourself in your favorite music wherever you are.
standards, and features HARMAN TrueStream, which guarantees peak wireless sound and
clarity. The Harman Kardon Go + Play Wireless system will meet all your listening and travel
needs, allowing you to immerse yourself in your favorite music wherever you are.
Introduction
The Harman Kardon Go + Play Wireless portable, high-fidelity wireless speaker system for
iPhone/iPod and iPad performs like a home theater system. With a groundbreaking design
that’s built for comfort, performance and freedom, the Harman Kardon Go + Play Wireless
unit will surround you with luxurious Harman Kardon
iPhone/iPod and iPad performs like a home theater system. With a groundbreaking design
that’s built for comfort, performance and freedom, the Harman Kardon Go + Play Wireless
unit will surround you with luxurious Harman Kardon
®
sound when you’re wirelessly streaming
audio to it via Bluetooth. Carry the unit by its stainless-steel arch handle to enjoy the ultimate
portable soundstage. The system will provide clean, powerful sound for any music source con-
nected to the Aux input and will even charge your iPhone/iPod and iPad while it is plugged into
the rear USB port. Enjoy the pinnacle of wireless audio performance with the Harman Kardon
Go + Play Wireless system – it will kick your listening experience into the future.
portable soundstage. The system will provide clean, powerful sound for any music source con-
nected to the Aux input and will even charge your iPhone/iPod and iPad while it is plugged into
the rear USB port. Enjoy the pinnacle of wireless audio performance with the Harman Kardon
Go + Play Wireless system – it will kick your listening experience into the future.
Special Features
IEQ – Intelligent equalization technology tailors the performance of the Harman Kardon
Go + Play Wireless microprocessor and digital signal processing (DSP) to optimize the system’s
output, based on battery or power-supply operation.
Bi-amplification – The Harman Kardon Go + Play Wireless unit uses two amplifiers to allow
for clean, powerful sound output.
Go + Play Wireless microprocessor and digital signal processing (DSP) to optimize the system’s
output, based on battery or power-supply operation.
Bi-amplification – The Harman Kardon Go + Play Wireless unit uses two amplifiers to allow
for clean, powerful sound output.
Package Contents
Carefully unpack your Harman Kardon Go + Play Wireless system and identify all components.
Power Supply
(AC cord varies with region)
Harman Kardon Go + Play Wireless Unit
harman/kardon
Go+Play Wireless Service Manual
Page 4 of 21
