MX-M700U (serv.man8). Administrator Settings Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 13

This setting is used to disable the function that changes
the key display order each time a selected tab is
touched on a screen that is divided into tabs, including
the screens for selecting the user name and folder for
the "SCAN TO HDD" and "FILE" functions, and the
address book screen of image send mode.

This does not affect the function that changes the order of

display of files in document filing folders.

This setting is used to prohibit changes to the clock
adjust setting. When this setting is enabled, "Clock" in
the system settings cannot be used. To adjust the date
and time, this setting must first be disabled (remove the
checkmark).

Use these settings when a peripheral device on the
machine has failed or when you wish to temporarily
disable a device. These settings can also be used to
change certain device function settings as needed to
suit the needs of your workplace.
"Device control" consists of the following settings:

● Original size detector setting
● Disabling of document feeder
● Disabling of duplex
● Disabling of large capacity cassette
● Disabling of stapler
● Disabling of punch
● Disabling of finisher
● Disabling of inserter
● Disabling of covers/inserts mode
● Saddle stitch position adjust
● Auto switching of finisher trays
● Rotated output
● Auto paper selection setting
● Optimization of a hard disk

This setting is used to select the standard original sizes
that are detected by the original size detection function.
Select one of the four groups indicated below. The
factory default setting is "AB-1 (INCH-1)". Original size
detection by the document glass can also be disabled.

If "CANCEL DETECTION AT DOCUMENT GLASS" is
set, originals will be regarded as EXTRA for all copier
functions and no original size will be displayed.

This setting is used to prevent the use of the automatic
document feeder when it malfunctions. In this case,
scanning can still be performed using the document
glass.

This setting is used to disable duplex printing when the
duplex module malfunctions. When this setting is
enabled, only one-sided printing can be performed.

Use this setting when you wish to prohibit the use of the
large capacity cassette or when it has failed.

This setting is used to disable stapling when the stapler
unit of the finisher or the saddle stitch finisher
malfunctions.

Use this setting when you wish to prohibit punching or
when the punch unit of the finisher or saddle stitch
finisher has failed.

Use this setting when you wish to prohibit the use of the
finisher or saddle stitch finisher, or when either has failed.

Use this setting when you wish to prohibit the use of the
inserter or when it has failed.

Use this setting to prohibit the use of covers/inserts mode.

Group

Detectable original sizes

Document feeder tray (for reversing
automatic document feeding)

Document glass

1 INCH-1

11" x 17", 8-1/2" x 14",
8-1/2" x 11", 
8-1/2" x 11"R,
5-1/2" x 8-1/2"

A4

2 INCH-2

11" x 17", 8-1/2" x 13",
8-1/2" x 11", 
8-1/2" x 11"R,
5-1/2" x 8-1/2"

A4

3 AB-1

A3, A4, A4R, A5,
B4, B5, B5R

8-1/2" x 11",
216x330

4 AB-2

A3, A4, A4R, A5,
B5, B5R, 216x330

8-1/2" x 11", B4