Read Sony SLV-ED115PS / SLV-ED215PS / SLV-ED215TH / SLV-ED313ME / SLV-ED313MJ / SLV-ED313SG / SLV-ED515PS / SLV-ED616ME / SLV-ED616MJ / SLV-ED616SG / SLV-ED815PS / SLV-ED815TH / SLV-ED817PS / SLV-ED817TH / SLV-ED818ME / SLV-ED818SG / SLV-ED915PS / SLV-ED915TH / SLV Service Manual online
(9-921-647-11)
contained in this service manual are indicated when these models are
common to all their corresponding models as given below.
ED313MJ
ED616MJ
ED817TH
ED815TH
ED215TH
ED915TH
EZ715NZ
EZ717NZ
splashes and bridges.
out to the customer and recommend their replacement.
safety checks before releasing the set to the customer:
mend their replacement.
LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS
AND IN THE PARTS LIST ARE CRITICAL TO SAFE
OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB-
LISHED BY SONY.
Color system
ED817/ED818/ED915/ED919:
NTSC 4.43 (Others)
ED815/ED817/ED818/ED915:
ED616/ED815/ED817/ED818/ED915:
CATV S01 to S05, S1 to S41
D/K: VHF R1 to R12/UHF R21 to R69
I: VHF SA4 to SA13/UHF B21 to B69/
CATV S01 to S05, S1 to S41
CATV A-8 to A-1, A to W, W+1 to W+ 84
is set to AUS),
EZ717AS:
UHF AS28 to AS69
CATV S01 to S05, S1 to S41
is set to NZ),
EZ717NZ:
UHF E21 to E69
CATV S01 to S05, S1 to S41
ED815/ED817/ED818/ED915/ED919/
EZ715NZ/EZ717NZ:
UHF channels 21 to 69
UHF channels 28 to 69
LINE-1 IN
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN (MONO), phono jack (1)
(ED115/ED215/ED313/ED515/ED616/
EZ111/EZ212/EZ414)
AUDIO IN, phono jack (2)
(ED815/ED817/ED818/ED915/ED919/
EZ717)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
VIDEO IN, phono jack (1)
Input signal: 1Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN (MONO), phono jack (2)
(ED515/ED616)
AUDIO IN, phono jack (2) (ED818/ED915/
ED919/EZ715/EZ717)
Input level: 327mVrms
Input impedane: more than 47 kilohms
Output signal: 1 Vp-p, 75 ohms, unbal-
anced, sync negative
AUDIO OUT (MONO), phono jack (1)
(ED115/ED215/ED313/EZ111/EZ212)
AUDIO OUT (MONO), phono jack (2)
(ED515/ED616/EZ414)
AUDIO OUT, phono jack (2)
(ED815/ED817/ED818/ED915/ED919/
EZ715/EZ717)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
Power requirements
ED313/ED515/ED616/ED815/ED817/
ED818/ED915/ED919) (Others)
220-240 V AC, 50 Hz (EZ111/EZ212/
EZ414/EZ715/EZ717)
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Plug adaptor (1) (ED313: ME, MJ/ED616: ME,
MJ/ED818: ME)
without notice.
SERVICE NOTE ...................................................................... 5
Basic Operations ........................................................... 1-8
Search Operations ........................................................ 1-12
Additional Operations .................................................... 1-14
Additional Information ................................................... 1-16
SCHEMATIC DIAGRAMS
•
Schematic Diagram .................................................. 4-29
Schematic Diagram .................................................. 4-31
Schematic Diagrams ................................................ 4-33
Schematic Diagrams ................................................ 4-33
Schematic Diagrams ................................................ 4-35E
(MA-402 BOARD IC101) ............................................... 5-1
(MA-402 BOARD IC101) ............................................... 5-1
(MA-402 BOARD IC101) ............................................... 5-2
(MA-402 BOARD IC101) ............................................... 5-3
OSD Microprocessor Pin Function
(MA-402 BOARD IC101) ............................................... 5-4
(NK-11 BOARD IC1) ..................................................... 5-5E
(GK-12 BOARD IC001) ................................................. 5-5E
2-1-1. Instruments to be Used ............................................ 7-1
2-1-2. Connection ............................................................... 7-1
2-1-3. Set-up of Adjustment ............................................... 7-1
2-1-4. Alingment Tapes ....................................................... 7-1
2-1-5. Specified I/O Level and Impedance ......................... 7-1
2-1-6. Adjusting Sequence ................................................. 7-2
2-2. Power Supply Adjustment ............................................. 7-2
2-2-1. Power Supply Check ................................................ 7-2
2-3. Servo System Adjustment ............................................. 7-2
2-3-1. RF Switching Position Adjustment ........................... 7-2
2-4. Audio System Adjustments ........................................... 7-3
2-4-1. Hi-Fi Audio System Adjustment ............................... 7-3
2. Frequency Response Check .................................... 7-3
3. Overall Level Characteristic and
2. E-E Output Level Check ........................................... 7-4
3. Frequency Responce Check .................................... 7-4
4. Overall Level Characteristic and Distortion
2-5-1. Separation Adjustment ............................................. 7-5
2-6. Parts Arrangement Diagram for Adjustments ............... 7-6E
8-1-2. Chassis Section ....................................................... 8-3
8-1-3. Mechanism Deck Section-1 ..................................... 8-5
8-1-4. Mechanism Deck Section-2 ..................................... 8-6
8-1-5. Mechanism Deck Section-3 ..................................... 8-7