Read Sharp MX-M654N / MX-M754N (serv.man4) Service Manual online
MX-M754N MX-KB13 (KEYBOARD) 28 – 2
8) Disconnect the connector of the operation panel unit, and
remove the harness from the wire saddle.
9) Remove the clamp, and pull out the harness toward you.
10) Remove the screw and the operation panel.
11) Remove the screw and the cover. Remove the screw and the
frame.
12) Remove the screw, and remove the cover.
MEMO: Since the panel rear cabinet is not used any more, it
may be disposed of.
may be disposed of.
B. Installation of the keyboard unit
1)
Pass the harness through the hole in the keyboard unit.
Attach the keyboard unit, and fix the screw.
Attach the keyboard unit, and fix the screw.
2)
Attach the frame, and fix the screw. Attach the cover, and fix
the screw.
the screw.
3)
Attach the two clamps and arrange the wires.
NOTE: Check to confirm that the harness does not enter the
panel.
For the reference, refer to the figure below.
For the reference, refer to the figure below.
ĭ
Į
Ĭ
Ĭ
ĭ
Ĭ
Ĭ
ĭ
ĭ
ĭ
Į
Ĭ
Ĭ
ĭ
Ĭ
ĭ
Į
Į
Ĭ
Į
ĭ
ĭ
ĭ
Ĭ
Ĭ
ĭ
Į
į
Click on the first or last page to see other MX-M654N / MX-M754N (serv.man4) service manuals if exist.