Read Sharp MX-M654N / MX-M754N (serv.man4) Service Manual online
MX-M754N MX-FR47U/FR47 (DATA SECURITY KIT) 26 – 3
3) Select the firmware file (SFU file) of the target.
Use [UP] key and [DOWN] key to select the target file.
When [OK] key is pressed with the directory name displayed,
the control can enter the lower level directory. (However, one-
step lower level)
When [BACK] key is pressed in the lower level directory, the
control can return to the upper level directory.
When [OK] key is pressed with the directory name displayed,
the control can enter the lower level directory. (However, one-
step lower level)
When [BACK] key is pressed in the lower level directory, the
control can return to the upper level directory.
4) Press [OK] key.
The selected firmware file (SFU) is read. (It takes about 1 min-
ute.)
Display of reading file data
ute.)
Display of reading file data
5) After completion of reading, the firmware is installed (updated).
(It takes about 5 - 6 minutes.)
Display of firmware install (Update) process
Display of firmware install (Update) process
* The abbreviated name of the firmware which is currently
installed (updated) is displayed sequentially.
* The screen may flash instantaneously during the install
(update) process. This is a normal operation.
6) Check the result of install (update) of the firmware.
Use [UP] key and [DOWN] key to check the results of install
(update) of all the firmware programs.
Display of firmware update results
(update) of all the firmware programs.
Display of firmware update results
OK: Update success
NG: Update failed
Not Update: The update process is not executed.
Cause of Update process not executed:
The option unit for the target firmware is not connected.
NG: Update failed
Not Update: The update process is not executed.
Cause of Update process not executed:
The option unit for the target firmware is not connected.
7) Turn OFF the power to terminate the boot mode.
C. Enable setting of functions
1) Enter the product key to enable the functions.
a)
Enter the system setting mode.
b)
The machine enters the product key input mode.
c)
Enter the product key.
d)
Press the registration key.
2) After completion of the product key input, the data evacuation
will automatically start.
Once the data evacuation process is completed, turn OFF the
main power switch.
Once the data evacuation process is completed, turn OFF the
main power switch.
3) Turn ON the main power switch and the power switch on the
operation panel.
D. Confirmation of function enable
Execute SIM22-10 to check that SECURITY matches the product
name of the data security kit (MX-FR47 or FR47U).
name of the data security kit (MX-FR47 or FR47U).
E. Execution of initial settings
1) If the data backup has been made by Document Filling func-
tion (including Quick File function) before installing the data
security kit, be sure to perform [Clear All Memory] to delete the
saved data after the installation.
security kit, be sure to perform [Clear All Memory] to delete the
saved data after the installation.
2) Place the backup data back to the memory (HDD) of the main
unit.
3)
Carry out the operation check and initial settings in accordance
with the instructions in the supplied CD and Installation Man-
ual.
(*Only Installation Manual is supplied for MX-FR47U)
with the instructions in the supplied CD and Installation Man-
ual.
(*Only Installation Manual is supplied for MX-FR47U)
F. Common criteria authentication label
attachment (MX-FR47 only)
Attach the common criteria authentication label packed together to
the position shown below.
the position shown below.
Firm Update
Reading Data
Firm Update
Writing Data
Writing Data
Firm Update
IcMM
Result:OK
Common Criteria
Validated
MFP Data Security Kit
Validated
MFP Data Security Kit
5
5
: ‘16/Apr
Click on the first or last page to see other MX-M654N / MX-M754N (serv.man4) service manuals if exist.