Read Sharp MX-M654N / MX-M754N (serv.man4) Service Manual online
MX-M754N IC card reader 27 – 3
3
NOTE: Adjust the position of USB connector that roughly in
the center of the holder.
Bind up the cord on the inside of the holder.
Bind up the cord on the inside of the holder.
Holder type B
Y591-EHID-201 v01
Bind up the cords at the about 80mm from the end of holder.
Bind up the cord into about 150 mm lengths.
At that time, adjust the position of USB connector that roughly
in the center between the ends of card holder and the bind up
cord.
At that time, adjust the position of USB connector that roughly
in the center between the ends of card holder and the bind up
cord.
NOTE: The binding band direction is as follows.
Hook the left part of holder B to the panel and fix the right part
with the screw.
with the screw.
C. Attach the upper cabinet front right
1)
Attach the upper cabinet front right and fix the screw.
D. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
E. System setting modification
IC card reader device registration
1)
Device registration
a)
Enter the card reader setting menu as shown below.
System Settings
User ControlAdministrator Login
Card Reader Device Registration
b)
Press [Read] button.
c)
Disconnect the connector which links the machine and the
IC card reader, and then insert it back.
IC card reader, and then insert it back.
d)
Press [OK] button.
e)
Check to confirm that values are displayed on "Product
ID" and "Vender ID".
ID" and "Vender ID".
f)
Press [SUBMIT] button, and check to confirm that the suc-
cess dialog message is displayed.
cess dialog message is displayed.
2)
Setting
a)
Enter the card reader setting menu as shown below.
System Settings
User CONTROL
Administrator Login
Card Type/Card Reader Settings
b)
Check-mark "Use IC Card for Authentication".
c)
Press [Submit] button.
F. IC card recognition check
MEMO: There are two check methods of IC card recognition. Use
either one to check that the IC card reader is recognized.
either one to check that the IC card reader is recognized.
Check method 1
1)
Enter the card reader setting menu as shown below.
Home
SettingsSystem SettingsUSB-Device Check
2)
Check to confirm that "Card Reader/Writer" is displayed.
Check method 2
Check to confirm that the icon of the card reader is displayed on the
system area of the home screen.
(If there is no check-mark on "Use IC Card for Authentication," the
icon is not displayed.)
system area of the home screen.
(If there is no check-mark on "Use IC Card for Authentication," the
icon is not displayed.)
Screw
Screw
①
A
B
①
②
②
1
: ‘14/Dec
1
1
3
: ‘15/June
3
Click on the first or last page to see other MX-M654N / MX-M754N (serv.man4) service manuals if exist.