Read Sharp MX-M654N / MX-M754N (serv.man2) Handy Guide online
REPAIR HINTS
SHARP
60
SPECIFICATION
Model
Symptom
Advice
ALL
What is the recommended
resolution/dimensions when using
custom images for the HOME Screen
and Button Icons?
The maximum image size which can be uploaded to the
Home Screen is 1024 x 544.
Depending on the number of icons displayed on the
HOME screen, please use the following:-
Pattern 1: Icon Qty 4 : Size 160 x 160
Pattern 2: Icon Qty 8 : Size 160 x 160
Pattern 3: Icon Qty 8 : Size 100 x 100
Pattern 2: Icon Qty 8 : Size 160 x 160
Pattern 3: Icon Qty 8 : Size 100 x 100
Pattern 4: Icon Qty 12 : Size 100 x 100
Pattern 5: Icon Qty 12 : Size 86 x 86
Pattern 6: Icon Qty 18 : Size 86 x 86
Pattern 6: Icon Qty 18 : Size 86 x 86
When installing MX-FN17 Inner
Finisher, is it possible to install the
MX-PN11 Hole Punch unit?
The Hole Punch option is not supported on
MX-M654N/754N series when using the
MX-FN17 Inner Finisher.
Is it possible to print onto Banner
Paper up to 1200mm in length?
The MX-M654N/754N series can support printing up to
1200mm in length from the bypass tray only.
Note: A setting change (Sim26-50, Item F) is required.
How do you print User Account
information when User Control is
enabled?
Select Settings - User Control - Default Settings.
Scroll down and select the required option from User
Information Print menu.
Note: The Administrators password will be required.
Is it possible to Tandem
MX-M654N/754N series with another
device?
Tandem operation is only supported with
MX-M654N/754N series only.
TROUBLE CODES
MX-FN19
MX-FN20
MX-FN21
MX-FN22
MX-RB15
MX-FN20
MX-FN21
MX-FN22
MX-RB15
F1-21
F1-50
F1-50
To support MX-M654/754N series, the Finisher & Curl
Correction firmware must be updated to the following
versions (or higher):
MX-FN19/FN20 FINISHER:
01.08.01.00
MX-FN20 SADDLE:
01.01.01.00
MX-FN21/FN22 FINISHER:
01.17.01.00
MX-FN22 SADDLE:
01.08.01.00
MX-RB15 DECURL:
01.03.01.00
TROUBLE INDICATIONS
ALL
Card Reader communication trouble.
This indication is displayed if a Card Reader is not
detected correctly when a Card Reader is registered on
the MFP.
Enter User Control – Card Type/ Card Reader Settings
menu and uncheck Use IC Card for Authentication
And/or de-register the Card Reader from Card Reader
Device Registration menu via the operation panel.
MX-
EB12N
HDD Trouble: Use SIM62-20 to check the HDD status.
For troubleshooting, refer to the MX-EB15 Mirroring Kit
section within this guide.
Click on the first or last page to see other MX-M654N / MX-M754N (serv.man2) service manuals if exist.