Read Sharp MX-M364N / MX-565N Handy Guide online
Repair Hints
SHARP
Document Solution Centre
55
SPECIFICATION
Model
Symptom
Advice
ALL
Is it possible to Tandem
MX-M365/465/565 series with another
device?
Tandem operation is only supported with
MX-M365/465/565N series only.
Is it possible to retain the Destination
Address (Image Send Mode), once the
current Scan operation is complete?
To enable this function, change,
SIM55-03 SW30-3 from 0 (default) to 1.
Once enabled, go to System Settings-Image Send Settings-
Operation Settings menu and enable the “Hold Address
for a while after scanning is completed” option for the
relevant Image Send mode.
TROUBLE CODES
MX-FN10
MX-FN11
MX-FN17
MX-FN18
MX-FN11
MX-FN17
MX-FN18
F1-50
To support MX-M365/465/565N series, the
Finisher/Saddle firmware must be updated to the
following versions (or higher):
MX-FN10 v01.13.02; MX-FN17 v02.00.03
MX-FN11/18 v01.07.02; MX-FN18 (Saddle) v01.02.03.
PAPER FEED & TRANSPORT
MX-DE13
MX-DE14
MX-DE14
CPFD2_N jams
To support MX-M365/465/565N series, the MX-DE13/14
Desk units have been upgraded since June 2013
production.
When using an earlier Desk Unit, the Desk Firmware must
be updated to 03.00.G1 (or higher) and the Transport
Motor updated (RMOTP0957FCP2)
DOCUMENT FILING / PUBLIC FOLDER
ALL
Unable to browse the NAS/Public
Folder, even though the Public
Folder/NAS settings are enabled within
the Network Settings menu.
The NBT/WINS Port (Security setting) must be enabled to
use NAS/Public storage. For security measures, this port
setting is disabled as default.
Can you use Domain User Accounts to
browse the NAS/Public Folders?
NAS/Public Folders support local accounts only
(programmed on MFP)
DATA SECURITY KIT
MX-FR44U
When printing to a specific folder
without PIN, Error 421 occurs - only
when DSK is installed.
To print to a specific folder without PIN, perform the
following setting changes:-
1. Settings - Security Settings - Other Settings -
Disabling of Document Filing menu:-
Un tick Sharing Mode for Printer.
2. User Control - Authority Group List - Add
Authority group Registration - Job Setting -
Security - Document Filing Approval Setting
menu:-
Security - Document Filing Approval Setting
menu:-
Enable Sharing Mode.
Click on the first or last page to see other MX-M364N / MX-565N service manuals if exist.