Read Sharp MX-M364N / MX-565N (serv.man5) Service Manual online
MX-M565N AR-SU1 22 – 3
D. Finish stamp cartridge attachment
1) Open the left cover, and open the document tray.
2) Attach the finish stamp cartridge.
E. Turn ON the power of the main unit
1) Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
power switch.
F. Installation check
1) Use SIM22-10 to check to confirm that the finish stamp (AR-
SU1) is recognized.
3. Installation for DSPF
A. Install the stamp unit
1)
Open the DSPF unit, remove the OC mat.
2)
Remove the screw, and remove the paper exit PG cover.
Remove the screw.
Disengage the pawl, and remove the stamp case unit.
Remove the screw.
Disengage the pawl, and remove the stamp case unit.
3)
Remove the screw which fixs the earth cable and attach the
stamp unit (Packed items) to the stamp case which was
removed from the DSPF unit with the screw. (Fix it together
with the earth wire.)
stamp unit (Packed items) to the stamp case which was
removed from the DSPF unit with the screw. (Fix it together
with the earth wire.)
* Arrange the harness of the stamp unit as shown below.
1
2
2
4
3
Click on the first or last page to see other MX-M364N / MX-565N (serv.man5) service manuals if exist.