MX-M364N, MX-565N (serv.man5). Installation Manual (Revised January2016). - Sharp Copying Equipment Service Manual (repair manual). Page 127

MX-M565N  IC card reader  27 – 6

2) Setting

a)

Enter the card reader setting menu as shown below.
System Settings > User Management > Card Type/Card 
Reader Settings

b)

Check-mark “Use IC Card for Authentication”.

c)

Press [Submit] button.

There are two check methods of IC card recognition. Use either
one to check that the IC card reader is recognized.
Check method 1
1) Enter the card reader setting menu as shown below.

Home > Settings > System Settings > USB-Device Check

2) Check to confirm that “Card Reader/Writer” is displayed.

Check method 2
Check to confirm that the icon of the card reader is displayed on the
system area of the home screen. 
(If there is no check-mark on “Use IC Card for Authentication,” the
icon is not displayed.)

Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.

1)

Attach the operation panel cover.

2)

Attach the front cabinet upper.

The following procedures are executed only when a request is
made by a user for customizing the data format of IC card reading.

1)

Make the setting file for HID card reading. 
For the making procedures, refer to the Manual of Setting File
for HID Card Reading.

2)

Copy the setting file to a USB memory.