MX-M364N, MX-565N (serv.man4). Service Manual (Revised January 2016). - Sharp Copying Equipment Service Manual (repair manual). Page 17

MX-M565N  EXTERNAL VIEW AND INTERNAL STRUCTURE  3 – 4

1

Touch panel

Messages and keys appear in the touch panel display. Touch the displayed keys to perform a variety of 
operations. The [HOME], [JOB STATUS] and [SYSTEM SETTINGS] keys are also available here. When a key is 
touched, a beep sounds and the selected item is highlighted. This provides confirmation as you perform an 
operation.

2

[HOME] key

Touch this key to display the home screen. Frequently used settings can be registered in the home screen to 
enable quick and easy operation of the machine.

3

[JOB STATUS] key

Touch this key to display the job status screen. The job status screen is used to check information on jobs and to 
cancel jobs.

4

PRINT mode indicators

* READY indicator

Print jobs can be received when this indicator is lit.

* DATA indicator

This blinks while print data is being received and lights steadily while printing is taking place.

5

Numeric keys

These are used to enter the number of copies, fax numbers, and other numerical values. These keys are also 
used to enter numeric value settings (except for the system settings).

6

[CLEAR] key 

Press this key to return the number of copies to "0".

7

[SYSTEM SETTINGS] key

Touch this key to display the system settings menu screen. The system settings are used to configure paper tray 
settings, store addresses for transmission operations, and adjust parameters to make the machine easier to use.

8

IMAGE SEND mode indicators

* LINE indicator

This lights up during transmission or reception of a fax or Internet fax. This also lights during transmission of an 
image in scan mode.

* DATA indicator

This blinks when a received fax or Internet fax cannot be printed because of a problem such as out of paper. 
This lights up when there is a transmission job that has not been sent.

9

Stylus pen

This can be used to touch a key displayed on the touch panel.

10

[STOP] key

Press this key to copy job or scanning of  an original.

11

[START] key 

Press this key to copy or scan an original in monochrome. This key is also used to send a fax in fax mode.

12

Main power indicator

This lights up when the machine’s main power switch is in the on position.

13

[POWER] key

Use this key to turn the machine power on and off.

14

[LOGOUT] key

Press this key to log out after you have logged in and used the machine. When using the fax function, this key 
can also be pressed to send tone signals on a pulse dial.line

15

[#/P] key

When using the copy function, press this key to use a job program. When using the fax function, this key can be 
used when dialing.

16

[CLEAR ALL] key

Press this key to return to the initial operation state. Use this key when you wish to cancel all settings that have 
been selected and start operation from the initial state.

17

[POWER SAVE] key

Use this key to put the machine into auto power shut-off mode to save energy.

: ‘16/Jan