MX-M350N, MX-M350U, MX-M450N, MX-M450U (serv.man13). Unpacking and Installation - Sharp Copying Equipment Service Manual (repair manual). Page 2

MX-M350/M450 N/U  UNPACKING AND INSTALLATION  6 - 2

Improper installation may damage this product. Please note the
following during initial installation and whenever the machine is
moved.

1) The machine should be installed near an accessible power

outlet for easy connection.

2) Be sure to connect the power cord only to a power outlet that

meets the specified voltage and current requirements. Also
make certain the outlet is properly grounded.

• For the power supply requirements, see the name plate of

the main unit.

3) Do not install your machine in areas that are:

• damp, humid, or very dusty

• exposed to direct sunlight

• poorly ventilated

• subject to extreme temperature or humidity

changes, e.g., near an air conditioner or heater.

4) Be sure to allow the required space around the machine for

servicing and proper ventilation.

1) Release the joint, and remove the packing case. 

2) Remove the top pad, and open the electrostatic polyethylene

bag.

Check the following items are included in the package.

3) Remove the cushioning materials from the right and left of the

front side.

4) Remove the locking tape from the right and left sides of the

tray.

Then, Remove the top of the carton and lower the plastic bag
covering the machine while the machine is still on the carton
base.

5) Remove the packing tape from the paper tray, pull out the

paper tray until it stops and remove it by tilting it upward.

6) One person must lift by the empty front tray pocket with the

right hand and steady the machine with the left hand placed at
the upper left of the machine.

The other person must lift with the right hand by using the lift-
ing recess in the rear of the machine and also steady the
machine with the left hand as shown in the illustration. 

Note: The center of gravity of the machine lies in the left side

when viewed from the Back of machine. When lifting the

machine, be careful not to drop it.

MX-M350N/M450N

MX-M350U/M450U

Operating Manual 
(Common/Copier, Administrator guide (System settings))
Web manuals (Printer) 
(Network Scan)

–

Installation manual (PCL/PS)

23-5/8"

(60cm)

31-1/2"
(80cm)

11-13/16" (30cm)

23-5/8" (60cm)

CD-ROM (Printer)
Maintenance card/Maintenance case (Except UK)
Warranty Registration (UK only)
Delivery/installation report  (Europe only)
MSDS card (North America/UK only)
Warranty (Australia only)
Scanner key sheet (Local area only)
Dust cover (Local area only)

MX-M350N/M450N

MX-M350U/M450U