MX-M266N, MX-M316N, MX-M356N (serv.man83). Rom upgrade..(2) ICU u201v1 PCU 0202v1. - Sharp Copying Equipment Technical Bulletin (repair manual)

Model
MX-M266N MX-M316N MX-M356N (serv.man83)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
61.74 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Rom upgrade..(2) ICU u201v1 PCU 0202v1.
File
mx-m266n-mx-m316n-mx-m356n-sm83.pdf
Date

View Sharp MX-M266N / MX-M316N / MX-M356N (serv.man83) Technical Bulletin online

 
Sharp Business Systems UK Plc., Document Systems Support
 
Date:  
12
th
 April 2016 
Model:  
MX-M266N/M316N/M356N 
Ref.:  
DCE996 
Colour:  
 
White 
Page:  
1 of 2 
TECHNICAL BULLETIN 
 
 
 
 
 
 
 
 
 
1. Model Name: 
MX-M266N/M316N/M356N 
 
2. Description: 
Upgrade of ICU and PCU-ROM   
  
 
MX-M266N/M316N 
From mid-January 2016 production 
Packing label 
ICU 
PCU 
SCU 
P-COM 
B02 U201v1  0202v1  0100v1  0100v1 
   Item of change: See the separate sheet. 
 
   MX-M356N 
From mid-January 2016 production 
Packing label 
ICU 
PCU 
SCU 
P-COM 
A02 U201v1  0202v1  0100v1  0100v1 
   Item of change: See the separate sheet. 
 
 
 
ROM version combination table     
No. 
ROM 
Control 
No. 
ICU PCU SCU P-COM  Action 
S/I 
No 
① 
B01 u200v1 0200v1 0100v1  0100v1 
2015/8 Mid 
DCJ-854 
A01 u200v1 0200v1 0100v1  0100v1 
 
 
 
 
 
 
 
 
ROM UPGRADE…(2) 
 
Sharp Business Systems UK Plc., Document Systems Support
 
 
[Item of change] 
 
 
 
 
No. Item 
Detail 
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed even after replenishing the 
paper if the paper becomes empty during printing List of Number of Pages Used of the user 
information (System Settings/User control/Other settings).    This problem has been corrected.   
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed when rebooting after importing 
Storage Backup data in Address Book on the Web page of the main unit.    This problem has 
been corrected. 
Main unit control 
Engine Soft SW has been established to switch (Enable/Disable) the transfer output: OFF at the 
rear edge of the print as the countermeasure for black line on the rear edge of the paper. 
 
SIM55-1 SW No.29 Data No.2-3 
00: Disable (Normal operation)    ◆ Default 
01: Disable (Normal operation) 
10: Enable for only Side1 (including the 1-sided print) 
11: Enable for both Side1/Side2 
Main unit control 
In case that the void area is generated at the rear edge of the image when performing 2-sided 
print with the long sized paper, the countermeasure has been added to the engine SW, and the 
default has been changed. 
 
SIM55-1 SW No.5 Data No.2 
0: No remedy of the void area with the long sized paper 
1: Remedy of the void area with the long sized paper  ◆Default 
 
*The initial value above will not change when updating the version in the field.    Please change 
the setting if necessary. 
5  Main unit control 
Addition of the control to improve H3 trouble. 
6  Main unit control 
Improvement of the paper alignment when performing Offset output by the shifter. 
7  Main unit/Web 
Support of Arabic on the Web of the main unit/Web Help Page. 
 
Sharp Business Systems UK Plc., Document Systems Support
 
 
[Item of change] 
 
 
 
 
No. Item 
Detail 
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed even after replenishing the 
paper if the paper becomes empty during printing List of Number of Pages Used of the user 
information (System Settings/User control/Other settings).    This problem has been corrected.   
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed when rebooting after importing 
Storage Backup data in Address Book on the Web page of the main unit.    This problem has 
been corrected. 
Main unit control 
Engine Soft SW has been established to switch (Enable/Disable) the transfer output: OFF at the 
rear edge of the print as the countermeasure for black line on the rear edge of the paper. 
 
SIM55-1 SW No.29 Data No.2-3 
00: Disable (Normal operation)    ◆ Default 
01: Disable (Normal operation) 
10: Enable for only Side1 (including the 1-sided print) 
11: Enable for both Side1/Side2 
Main unit control 
In case that the void area is generated at the rear edge of the image when performing 2-sided 
print with the long sized paper, the countermeasure has been added to the engine SW, and the 
default has been changed. 
 
SIM55-1 SW No.5 Data No.2 
0: No remedy of the void area with the long sized paper 
1: Remedy of the void area with the long sized paper  ◆Default 
 
*The initial value above will not change when updating the version in the field.    Please change 
the setting if necessary. 
5  Main unit control 
Addition of the control to improve H3 trouble. 
6  Main unit control 
Improvement of the paper alignment when performing Offset output by the shifter. 
7  Main unit/Web 
Support of Arabic on the Web of the main unit/Web Help Page. 
 
Sharp Business Systems UK Plc., Document Systems Support
 
 
[Item of change] 
 
 
 
 
No. Item 
Detail 
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed even after replenishing the 
paper if the paper becomes empty during printing List of Number of Pages Used of the user 
information (System Settings/User control/Other settings).    This problem has been corrected.   
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed when rebooting after importing 
Storage Backup data in Address Book on the Web page of the main unit.    This problem has 
been corrected. 
Main unit control 
Engine Soft SW has been established to switch (Enable/Disable) the transfer output: OFF at the 
rear edge of the print as the countermeasure for black line on the rear edge of the paper. 
 
SIM55-1 SW No.29 Data No.2-3 
00: Disable (Normal operation)    ◆ Default 
01: Disable (Normal operation) 
10: Enable for only Side1 (including the 1-sided print) 
11: Enable for both Side1/Side2 
Main unit control 
In case that the void area is generated at the rear edge of the image when performing 2-sided 
print with the long sized paper, the countermeasure has been added to the engine SW, and the 
default has been changed. 
 
SIM55-1 SW No.5 Data No.2 
0: No remedy of the void area with the long sized paper 
1: Remedy of the void area with the long sized paper  ◆Default 
 
*The initial value above will not change when updating the version in the field.    Please change 
the setting if necessary. 
5  Main unit control 
Addition of the control to improve H3 trouble. 
6  Main unit control 
Improvement of the paper alignment when performing Offset output by the shifter. 
7  Main unit/Web 
Support of Arabic on the Web of the main unit/Web Help Page. 
 
Sharp Business Systems UK Plc., Document Systems Support
 
 
[Item of change] 
 
 
 
 
No. Item 
Detail 
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed even after replenishing the 
paper if the paper becomes empty during printing List of Number of Pages Used of the user 
information (System Settings/User control/Other settings).    This problem has been corrected.   
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed when rebooting after importing 
Storage Backup data in Address Book on the Web page of the main unit.    This problem has 
been corrected. 
Main unit control 
Engine Soft SW has been established to switch (Enable/Disable) the transfer output: OFF at the 
rear edge of the print as the countermeasure for black line on the rear edge of the paper. 
 
SIM55-1 SW No.29 Data No.2-3 
00: Disable (Normal operation)    ◆ Default 
01: Disable (Normal operation) 
10: Enable for only Side1 (including the 1-sided print) 
11: Enable for both Side1/Side2 
Main unit control 
In case that the void area is generated at the rear edge of the image when performing 2-sided 
print with the long sized paper, the countermeasure has been added to the engine SW, and the 
default has been changed. 
 
SIM55-1 SW No.5 Data No.2 
0: No remedy of the void area with the long sized paper 
1: Remedy of the void area with the long sized paper  ◆Default 
 
*The initial value above will not change when updating the version in the field.    Please change 
the setting if necessary. 
5  Main unit control 
Addition of the control to improve H3 trouble. 
6  Main unit control 
Improvement of the paper alignment when performing Offset output by the shifter. 
7  Main unit/Web 
Support of Arabic on the Web of the main unit/Web Help Page. 
 
Sharp Business Systems UK Plc., Document Systems Support
 
 
[Item of change] 
 
 
 
 
No. Item 
Detail 
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed even after replenishing the 
paper if the paper becomes empty during printing List of Number of Pages Used of the user 
information (System Settings/User control/Other settings).    This problem has been corrected.   
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed when rebooting after importing 
Storage Backup data in Address Book on the Web page of the main unit.    This problem has 
been corrected. 
Main unit control 
Engine Soft SW has been established to switch (Enable/Disable) the transfer output: OFF at the 
rear edge of the print as the countermeasure for black line on the rear edge of the paper. 
 
SIM55-1 SW No.29 Data No.2-3 
00: Disable (Normal operation)    ◆ Default 
01: Disable (Normal operation) 
10: Enable for only Side1 (including the 1-sided print) 
11: Enable for both Side1/Side2 
Main unit control 
In case that the void area is generated at the rear edge of the image when performing 2-sided 
print with the long sized paper, the countermeasure has been added to the engine SW, and the 
default has been changed. 
 
SIM55-1 SW No.5 Data No.2 
0: No remedy of the void area with the long sized paper 
1: Remedy of the void area with the long sized paper  ◆Default 
 
*The initial value above will not change when updating the version in the field.    Please change 
the setting if necessary. 
5  Main unit control 
Addition of the control to improve H3 trouble. 
6  Main unit control 
Improvement of the paper alignment when performing Offset output by the shifter. 
7  Main unit/Web 
Support of Arabic on the Web of the main unit/Web Help Page. 
 
Sharp Business Systems UK Plc., Document Systems Support
 
 
[Item of change] 
 
 
 
 
No. Item 
Detail 
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed even after replenishing the 
paper if the paper becomes empty during printing List of Number of Pages Used of the user 
information (System Settings/User control/Other settings).    This problem has been corrected.   
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed when rebooting after importing 
Storage Backup data in Address Book on the Web page of the main unit.    This problem has 
been corrected. 
Main unit control 
Engine Soft SW has been established to switch (Enable/Disable) the transfer output: OFF at the 
rear edge of the print as the countermeasure for black line on the rear edge of the paper. 
 
SIM55-1 SW No.29 Data No.2-3 
00: Disable (Normal operation)    ◆ Default 
01: Disable (Normal operation) 
10: Enable for only Side1 (including the 1-sided print) 
11: Enable for both Side1/Side2 
Main unit control 
In case that the void area is generated at the rear edge of the image when performing 2-sided 
print with the long sized paper, the countermeasure has been added to the engine SW, and the 
default has been changed. 
 
SIM55-1 SW No.5 Data No.2 
0: No remedy of the void area with the long sized paper 
1: Remedy of the void area with the long sized paper  ◆Default 
 
*The initial value above will not change when updating the version in the field.    Please change 
the setting if necessary. 
5  Main unit control 
Addition of the control to improve H3 trouble. 
6  Main unit control 
Improvement of the paper alignment when performing Offset output by the shifter. 
7  Main unit/Web 
Support of Arabic on the Web of the main unit/Web Help Page. 
 
Sharp Business Systems UK Plc., Document Systems Support
 
 
[Item of change] 
 
 
 
 
No. Item 
Detail 
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed even after replenishing the 
paper if the paper becomes empty during printing List of Number of Pages Used of the user 
information (System Settings/User control/Other settings).    This problem has been corrected.   
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed when rebooting after importing 
Storage Backup data in Address Book on the Web page of the main unit.    This problem has 
been corrected. 
Main unit control 
Engine Soft SW has been established to switch (Enable/Disable) the transfer output: OFF at the 
rear edge of the print as the countermeasure for black line on the rear edge of the paper. 
 
SIM55-1 SW No.29 Data No.2-3 
00: Disable (Normal operation)    ◆ Default 
01: Disable (Normal operation) 
10: Enable for only Side1 (including the 1-sided print) 
11: Enable for both Side1/Side2 
Main unit control 
In case that the void area is generated at the rear edge of the image when performing 2-sided 
print with the long sized paper, the countermeasure has been added to the engine SW, and the 
default has been changed. 
 
SIM55-1 SW No.5 Data No.2 
0: No remedy of the void area with the long sized paper 
1: Remedy of the void area with the long sized paper  ◆Default 
 
*The initial value above will not change when updating the version in the field.    Please change 
the setting if necessary. 
5  Main unit control 
Addition of the control to improve H3 trouble. 
6  Main unit control 
Improvement of the paper alignment when performing Offset output by the shifter. 
7  Main unit/Web 
Support of Arabic on the Web of the main unit/Web Help Page. 
 
Sharp Business Systems UK Plc., Document Systems Support
 
 
[Item of change] 
 
 
 
 
No. Item 
Detail 
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed even after replenishing the 
paper if the paper becomes empty during printing List of Number of Pages Used of the user 
information (System Settings/User control/Other settings).    This problem has been corrected.   
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed when rebooting after importing 
Storage Backup data in Address Book on the Web page of the main unit.    This problem has 
been corrected. 
Main unit control 
Engine Soft SW has been established to switch (Enable/Disable) the transfer output: OFF at the 
rear edge of the print as the countermeasure for black line on the rear edge of the paper. 
 
SIM55-1 SW No.29 Data No.2-3 
00: Disable (Normal operation)    ◆ Default 
01: Disable (Normal operation) 
10: Enable for only Side1 (including the 1-sided print) 
11: Enable for both Side1/Side2 
Main unit control 
In case that the void area is generated at the rear edge of the image when performing 2-sided 
print with the long sized paper, the countermeasure has been added to the engine SW, and the 
default has been changed. 
 
SIM55-1 SW No.5 Data No.2 
0: No remedy of the void area with the long sized paper 
1: Remedy of the void area with the long sized paper  ◆Default 
 
*The initial value above will not change when updating the version in the field.    Please change 
the setting if necessary. 
5  Main unit control 
Addition of the control to improve H3 trouble. 
6  Main unit control 
Improvement of the paper alignment when performing Offset output by the shifter. 
7  Main unit/Web 
Support of Arabic on the Web of the main unit/Web Help Page. 
 
Sharp Business Systems UK Plc., Document Systems Support
 
 
[Item of change] 
 
 
 
 
No. Item 
Detail 
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed even after replenishing the 
paper if the paper becomes empty during printing List of Number of Pages Used of the user 
information (System Settings/User control/Other settings).    This problem has been corrected.   
Main unit control 
Machine occasionally locks up with “Pleas wait” being displayed when rebooting after importing 
Storage Backup data in Address Book on the Web page of the main unit.    This problem has 
been corrected. 
Main unit control 
Engine Soft SW has been established to switch (Enable/Disable) the transfer output: OFF at the 
rear edge of the print as the countermeasure for black line on the rear edge of the paper. 
 
SIM55-1 SW No.29 Data No.2-3 
00: Disable (Normal operation)    ◆ Default 
01: Disable (Normal operation) 
10: Enable for only Side1 (including the 1-sided print) 
11: Enable for both Side1/Side2 
Main unit control 
In case that the void area is generated at the rear edge of the image when performing 2-sided 
print with the long sized paper, the countermeasure has been added to the engine SW, and the 
default has been changed. 
 
SIM55-1 SW No.5 Data No.2 
0: No remedy of the void area with the long sized paper 
1: Remedy of the void area with the long sized paper  ◆Default 
 
*The initial value above will not change when updating the version in the field.    Please change 
the setting if necessary. 
5  Main unit control 
Addition of the control to improve H3 trouble. 
6  Main unit control 
Improvement of the paper alignment when performing Offset output by the shifter. 
7  Main unit/Web 
Support of Arabic on the Web of the main unit/Web Help Page. 

Download Sharp MX-M266N / MX-M316N / MX-M356N (serv.man83) Technical Bulletin

Here you can view online and download Sharp MX-M266N / MX-M316N / MX-M356N (serv.man83) Technical Bulletin in PDF. MX-M266N / MX-M316N / MX-M356N (serv.man83) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp MX-M266N / MX-M316N / MX-M356N (serv.man83) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.