Read Sharp MX-M260 / MX-M260N / MX-M260FG / MX-M260FP (serv.man5) Service Manual online
MX-M260/M310/M260N/M310N MX-FN13 (Finisher) 5 - 3
13) Install the right cabinet to the original position, and fix it with two
screws.
Close the right door and the manual paper feed tray.
Close the right door and the manual paper feed tray.
14) Install the rear cabinet to the original position, and fix it with four
screws.
Install the maintenance cover, and fix it with one screw.
Install the maintenance cover, and fix it with one screw.
15) Attach the rail dummy cover to the guide rail by sliding it along the
guide rail in the arrow direction as shown in the figure.
16) Remove one round-head screw from the connection unit which is
packed with the finisher, and remove the front cabinet lower and
the connection cabinet temporarily.
the connection cabinet temporarily.
17) Slide the rail under the connection unit to the lock position.
18) Engage the finisher connection plate with the notch in the stay at
the right bottom of the machine.
Slide the connection plate to the bottom, and attach one M3 screw
as shown. (Use the screw bundled to the package.)
∗ Press the right side of the connection plate.
Slide the connection plate to the bottom, and attach one M3 screw
as shown. (Use the screw bundled to the package.)
∗ Press the right side of the connection plate.
19) After attaching the screw, pull the connection plate toward you.
Click on the first or last page to see other MX-M260 / MX-M260N / MX-M260FG / MX-M260FP (serv.man5) service manuals if exist.