MX-M200D, MX-M200DK (serv.man8). Operation Manual (Print Scan). - Sharp Copying Equipment User Guide / Operation Manual. Page 24

The system settings allow the administrator of the machine to enable and disable functions to suit the needs of the 
workplace. This chapter explains system settings for the printer and scanner functions. For system settings that are 
common to all modes, see the "System settings guide".

The system settings for the printer and scanner functions are shown in the following table. Factory default settings 
are indicated in bold. When "ENABLE, DISABLE" appears in the "Settings" column of a program, the program is 
enabled by pressing the [OK] key so that a checkmark appears in the checkbox. A checkmark in the checkbox (

) 

indicates that "ENABLE" is selected. No checkmark (

) indicates that "DISABLE" is selected.

For the initial administrator password set at the factory, see "PROGRAMMING AN ADMINISTRATOR 
PASSWORD" in the "System settings guide".

Printer

NOTICE PAGE

ENABLE, DISABLE

Select whether or not a Notice Page is printed 
when printing is not successful due to a 
memory full (or other) error.

FORCED OUTPUT OF 
PRINT

ENABLE, DISABLE

When no tray has the specified size of paper, 
this setting is used to select whether or not 
the print job will be printed on the closest size 
of paper.

Scanner

DISABLE USB SCAN

YES, NO

Select whether or not scanning from a 
computer and scanning from the machine are 
disabled. When "YES" is selected, USB 
scanning is disabled.