Read Sharp MX-LCX3N (serv.man8) Service Manual online
MX-LCX3N DISASSEMBLY AND ASSEMBLY 6 – 4
4) Remove the screws, and remove the solenoid.
D. Torque limiter
1) Remove the paper feed unit. (Refer to "2. Each unit removal")
2) Remove the screw, and remove the paper guide block.
2) Remove the screw, and remove the paper guide block.
3) Remove the screws, and remove the rear cover.
4) Disconnect the connector.
5)
Remove the E-ring, and remove the torque limiter.
E. Transport roller
1)
Remove the paper feed unit. (Refer to "2. Each unit removal")
2)
Loosen the screws, and remove the paper guide block.
3)
Remove the rear cover, and disconnect the connector. (Refer
to "D. Torque limiter")
to "D. Torque limiter")
4)
Remove the screw and the E-ring, and remove the parts.
Remove the transport roller.
Remove the transport roller.
F. Handling solenoid
1)
Check that there is no paper, and lower the paper feed table to
the lower limit with the main unit simulation mode.
the lower limit with the main unit simulation mode.
2)
Pull out the tray.
3)
Remove the screws.
1
2
3
4
Click on the first or last page to see other MX-LCX3N (serv.man8) service manuals if exist.