Read Sharp MX-LCX3N (serv.man8) Service Manual online
MX-LCX3N DISASSEMBLY AND ASSEMBLY 6 – 3
3. Major parts removal
A. Motor (Main)
1) Remove the rear cabinet. (Refer to "2. Each unit removal")
2) Disconnect the connector.
3) Remove the screws, and remove the motor.
2) Disconnect the connector.
3) Remove the screws, and remove the motor.
B. Lift motor
1) Remove the lift drive unit. (Refer to "2. Each unit removal")
2) Remove the screws, the E-ring, the bearing, and remove the
2) Remove the screws, the E-ring, the bearing, and remove the
gear unit.
3) Remove the screws, and remove the lift motor.
4)
Remove the ring, and remove the pulley.
* Applying grease at maintenance
A: Apply MOLYKOTE (UKOG-0062FCZZ)
B: Apply FLOIL (UKOG-0307FCZZ)
B: Apply FLOIL (UKOG-0307FCZZ)
C. Paper feed solenoid
1)
Remove the paper feed unit. (Refer to "2. Each unit removal")
2)
Remove the cover.
3)
Remove the screw, and remove the unit.
Disconnect the connector.
Disconnect the connector.
A
A
B
Click on the first or last page to see other MX-LCX3N (serv.man8) service manuals if exist.