MX-LCX3N (serv.man8). Service Manuals - Sharp Copying Equipment Service Manual (repair manual). Page 11

MX-LCX3N  DISASSEMBLY AND ASSEMBLY  6 – 2

5) Disconnect the connectors.
6) Remove the screws, and remove the paper feed unit.

1) Pull out the tray.
2) Remove the upper cabinet. (Refer to "A. Paper feed unit")
3) Remove the left front cabinet. (Refer to "A. Paper feed unit")
4) Remove the harness.

5) Remove the screws from the left and right rail sections, and

remove the tray unit from the rail.

1)

Check that there is no paper, and lower the paper feed table to
the lower limit with the main unit simulation mode.

2)

Remove the screws, and remove the rear cabinet.

3)

Remove the connectors.

4)

Remove the screws, and remove the lift drive unit.