MX-LC13 (serv.man15). IMPROVEMENTS FOR INSTALLING MX-LC13 N - Sharp Copying Equipment Technical Bulletin (repair manual). Page 63

MX-7500N  MX-LC13 (LARGE CAPACITY TRAYS)  9 – 20

NOTE: Before installation, be sure to turn both the operation and

main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.

1) Draw out the second tray from the unit.

Push the button of the bottom side of the unit to unlock the
tray, and then slowly pull out the tray until it stops.

2) Remove 3 screws from the tray.

NOTE: Don’t forget to remove those screws, it may break the

trays.

3) For 19 inch size paper, remove the step screw.

4) Slowly insert the tray to the original position.

1)

Attach the LCT connecting plate (Packed items No.1/2) to the
large capacity trays with the screws (Packed items No.4 S-
tight, M4 x 8).
MEMO: The reference label is attached to the plate. Attach it
so that the label can be seen from the outside.

2)

Fix the upper mounting plates (Packed items No.6) to the
machine with 4 screws (Packed items No. 11 S-tight, M4 x 18).

3)

Insert the installation plate of the LCT to the mounting plate of
the paper pass unit.